Study on Rational Width of Entry Protection Coal-pillar in Large Mining Height Working Face

被引：0

作者：

Wang, Xufeng ^{[1
]}

Zhang, Dongsheng ^{[1
]}

Cui, Tingfeng ^{[2
]}

Wang, Jinliang ^{[1
]}

Zhang, Wei ^{[1
]}

机构：

[1] China Univ Min & Technol, Sch Mines, State Key Lab Coal Resources & Safe Min, Xuzhou 221116, Jiangsu, Peoples R China

[2] Xuzhou Inst Architectural Technol, Xuzhou 221116, Jiangsu, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING APPLICATION II | 2012年 / 413卷

基金：

中国国家自然科学基金;

关键词：

large mining height; mining roadway; coal-pillar width;

D O I：

10.4028/www.scientific.net/AMR.413.404

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper demonstrates the attempt to identify a reasonable chain pillar width in the condition of large mining height, along with a case study at the gateway of No.1103 panel with large mining height in Suancigou Mine. Theoretical calculation and numerical simulation were employed as the main approaches during the research to figure out the rational width of entry protection coal-pillar, which was then proved to be capable for engineering practice. The results that derived from our research can offer technical support for spot production, and serve as references for future investigation upon chain pillar design under large mining height.

引用

页码：404 / +

页数：2

共 50 条

[21] Coal rib stability effect of mining-thickness with large mining height of working face in steeply inclined seams
Wang H.
Wu Y.
Xie P.
Luo S.
Liu K.
Liu M.
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2018, 35 (01): : 64 - 70
[22] Width Design of Small Coal Pillar of Gob-Side Entry Driving in Soft Rock Working Face and Its Application of Zaoquan Coal Mine
Chen, Ai
ADVANCES IN CIVIL ENGINEERING, 2021, 2021
[23] Trial of small gateroad pillar in top coal caving longwall mining of large mining height
Li Huamin
Syd Peng
Li Huigui
Xu Yongxiang
Yuan Ruifu
Yue Shuaishuai
Li Kun
InternationalJournalofMiningScienceandTechnology, 2016, 26 (01) : 139 - 147
[24] Trial of small gateroad pillar in top coal caving longwall mining of large mining height
Li Huamin
Peng, Syd
Li Huigui
Xu Yongxiang
Yuan Ruifu
Yue Shuaishuai
Li Kun
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY, 2016, 26 (01) : 139 - 147
[25] Study on the Regularity of Surface Movement and Deformation in Long Coal Face with Large Mining Height
Xiong, Zuqiang
He, Jun
Zhao, Leilei
ADVANCES IN INDUSTRIAL AND CIVIL ENGINEERING, PTS 1-4, 2012, 594-597 : 86 - +
[26] The Roof Safety under Large Mining Height Working Face: A Numerical and Theoretical Study
Wo, Xiaofang
Li, Guichen
Li, Jinghua
Yang, Sen
Lu, Zhongcheng
Hao, Haoran
Sun, Yuantian
MINERALS, 2022, 12 (10)
[27] Determination of Reasonable Width of Filling Body for Gob-Side Entry Retaining in Mining Face with Large Cutting Height
Pu, Shijiang
Wu, Guiyi
Liu, Qinzhi
Wang, Yuliang
Li, Qiang
Xiong, Yu
GEOFLUIDS, 2022, 2022
[28] Study on the rational width of coal pillars for protecting roadway in fully mechanized top caving mining face
Zhang, S. J.
Wang, J. A.
Wu, H. W.
Li, F.
ROCK MECHANICS: ACHIEVEMENTS AND AMBITIONS, 2012, : 719 - 730
[29] Pressure-Relief Mining of the Working Face Under the Coal Pillar in the Close Distance Coal Seams
Zhao J.
Li G.
Geotechnical and Geological Engineering, 2016, 34 (4) : 1067 - 1077
[30] Field and simulation study of the rational coal pillar width in extra-thick coal seams
He, Wenrui
He, Fulian
Zhao, Yongqiang
ENERGY SCIENCE & ENGINEERING, 2020, 8 (03) : 627 - 646

← 1 2 3 4 5 →