Study on Rational Width of Entry Protection Coal-pillar in Large Mining Height Working Face

被引：0
|
作者：
Wang, Xufeng [1 ]
Zhang, Dongsheng [1 ]
Cui, Tingfeng [2 ]
Wang, Jinliang [1 ]
Zhang, Wei [1 ]
机构：
[1] China Univ Min & Technol, Sch Mines, State Key Lab Coal Resources & Safe Min, Xuzhou 221116, Jiangsu, Peoples R China
[2] Xuzhou Inst Architectural Technol, Xuzhou 221116, Jiangsu, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING APPLICATION II | 2012年 / 413卷
基金：
中国国家自然科学基金;
关键词：
large mining height; mining roadway; coal-pillar width;
D O I：
10.4028/www.scientific.net/AMR.413.404
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper demonstrates the attempt to identify a reasonable chain pillar width in the condition of large mining height, along with a case study at the gateway of No.1103 panel with large mining height in Suancigou Mine. Theoretical calculation and numerical simulation were employed as the main approaches during the research to figure out the rational width of entry protection coal-pillar, which was then proved to be capable for engineering practice. The results that derived from our research can offer technical support for spot production, and serve as references for future investigation upon chain pillar design under large mining height.
引用
收藏
页码：404 / +
页数：2
相关论文
共 50 条
  • [1] Study on Characteristics of Front Abutment Pressure and Rational Stop-Mining Coal Pillar Width in Large Height Working Face
    Yu, Wei
    Fan, Gangwei
    Zhang, Dongsheng
    Guo, Wenhao
    Zhang, Wenhui
    Zhang, Shizhong
    Fan, Zhanglei
    PROCESSES, 2024, 12 (06)
  • [2] Reasonable Width of Narrow Coal Pillar of Gob-side Entry Driving in Large Mining Height
    Ming, Zhao
    Shuai, Zhang
    Yong, Chen
    2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING, 2017, 59
  • [3] Rational Width of Chain Coal-pillar in Shallow Coal Seam in the Northern Shaanxi Area
    Geng, Yaoqiang
    Suo, Yonglu
    ELECTRONIC JOURNAL OF GEOTECHNICAL ENGINEERING, 2019, 24 (02): : 405 - 412
  • [4] Multiscale study on coal pillar strength and rational size under variable width working face
    Huang, Peng
    Zhang, Qiang
    Xie, Jing
    Li, Junmeng
    Zhang, Qi
    Li, Meng
    Simao, Francisco Chano
    FRONTIERS IN ENVIRONMENTAL SCIENCE, 2024, 12
  • [5] Roadway impact mechanism and optimization design under coal pillar disturbance in large mining height working face
    Xu X.
    He F.
    Li X.
    Lyu K.
    He C.
    Li L.
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2021, 38 (03): : 547 - 555and564
  • [6] Study on reasonable width of pillar between roadways in large mining height face with double roadways layout
    Yu, Xueyi
    Wang, Qi
    Zhao, Bingchao
    Bo, Qishan
    Wang, Hongtao
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2015, 34 : 3328 - 3336
  • [7] Combined test research on coal-rock pillar width setting of district sublevel for fully-mechanized face with large mining height
    Zheng, Y. F.
    Ju, W. J.
    Kang, H. P.
    ROCK CHARACTERISATION, MODELLING AND ENGINEERING DESIGN METHODS, 2013, : 889 - 894
  • [8] STABILITY OF A FACE GUARD IN A LARGE MINING HEIGHT WORKING FACE
    Wang, D. L.
    Zeng, X. T.
    Wang, G. F.
    Li, R.
    INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2021, 20 (03) : 547 - 558
  • [9] Study on unloading instability model of working face with large mining height
    Fu B.
    Tu M.
    Gao M.
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2017, 34 (06): : 1128 - 1133
  • [10] Study of coal face failure mechanism of a large-cutting-height mining face
    Kong D.
    Liu Y.
    Liu Q.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2018, 37 : 3458 - 3469
12345