Influence of different cover ratios on Gas-particle flow characteristics of a centrally-fuel-rich primary air burner: experiment and simulation

The flow field for different cover ratios within a three-level conical ring concentrator of a centrally-fuel-rich swirl coal combustion burner has been studied both experimentally and numerically. A particle dynamics anemometer measurement system was employed in the study to measure velocity and particle volume flux after the outlet of third-level ring. And the numerical simulations were used to calculate the flow field in the conical ring region. In each cross-section, after the outlet of third-level ring, concentration ratio for each cover ratio is always larger than 2. With conical ring concentrator in the primary air tube, the coal concentration can be concentrated to a suitable range. In the cross-sections 0.5<x/D<4.0, as cover ratio increases, concentration ratio decreases and resistance coefficient increases. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of the Intelligent Information Technology Application Research Association.