Hot Deformation Behavior and Dynamic Recrystallization Model of 6082 Aluminum Alloy in High Temperature

被引：3
作者：
Ren, Weiwei [1 ]
Xu, Chunguo [1 ]
Chen, Xianglong [1 ]
机构：
[1] 18 Xueqing Rd, Beijing, Peoples R China
来源：
4TH ANNUAL INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND ENGINEERING (IWMSE2018) | 2018年 / 381卷
关键词：
STRAIN-RATE; INITIATION;
D O I：
10.1088/1757-899X/381/1/012175
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
By high temperature compression experiment, true stress vs true strain curve of 6082 aluminium alloy are obtained at the temperature 460 degrees C - 560 degrees C and the strain rate 0.01s-1-10s-1. The effects of deformation temperature and strain rate on the grain evolution are investigated; Critical strain of dynamic recrystallization of 6082 aluminium alloy model is obtained. The results show lower strain rates are beneficial to increase the volume fraction of recrystallization, the average grain size is coarse; High strain rates are beneficial to refine average grain size, the volume fraction of dynamic recrystallization is less than that in low strain rates. High temperature cause coarse grains. Dynamic recrystallization grain evolution model and model of DRX fraction can effectively predict recrystallization grain size and recrystallization fraction of 6082 aluminium alloy thermal deformation.
引用
收藏
页数：9
相关论文
共 12 条
  • [1] Chen X H, 2013, CHINESE J NONFERROUS, V1, P44
  • [2] Ebrahimi GR, 2012, J MATER SCI TECHNOL, V28, P467, DOI 10.1016/S1005-0302(12)60084-X
  • [3] Constitutive equation and hot deformation behavior of homogenized Al-7.68Zn-2.12Mg-1.98Cu-0.12Zr alloy during compression at elevated temperature
    Feng, D.
    Zhang, X. M.
    Liu, S. D.
    Deng, Y. L.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 608 : 63 - 72
  • [4] Guo H L, 2013, CHINESE J NONFERROUS, V6, P1507
  • [5] Prediction of the critical conditions for initiation of dynamic recrystallization
    Mirzadeh, H.
    Najafizadeh, A.
    [J]. MATERIALS & DESIGN, 2010, 31 (03) : 1174 - 1179
  • [6] Initiation of dynamic recrystallization in constant strain rate hot deformation
    Poliak, EI
    Jonas, JJ
    [J]. ISIJ INTERNATIONAL, 2003, 43 (05) : 684 - 691
  • [7] A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization
    Poliak, EI
    Jonas, JJ
    [J]. ACTA MATERIALIA, 1996, 44 (01) : 127 - 136
  • [8] Robert M, 1983, INT J ROBOT RES, V2, P50
  • [9] SELLARS CM, 1981, MET FORUM, V4, P75
  • [10] Determination of critical conditions for dynamic recrystallization of a microalloyed steel
    Shaban, M.
    Eghbali, B.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17): : 4320 - 4325
12