Creep rupture behavior of Grade 91 steel

被引：101
作者：
Shrestha, Triratna [1 ]
Basirat, Mehdi [2 ]
Charit, Indrajit [1 ]
Potirniche, Gabriel P. [2 ]
Rink, Karl K. [2 ]
机构：
[1] Univ Idaho, Dept Chem & Mat Engn, Moscow, ID 83844 USA
[2] Univ Idaho, Dept Mech Engn, Moscow, ID 83844 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2013年 / 565卷
关键词：
Grade; 91; steel; Creep rupture; Fractography; Creep life prediction; Fracture mechanism map; MODIFIED 9CR-1MO STEEL; LONG-TERM CREEP; FRACTURE-MECHANISM MAPS; FERRITIC STEEL; STRUCTURAL-MATERIALS; NUCLEAR-REACTORS; CHROMIUM STEELS; POWER-PLANT; DEFORMATION; STRESS;
D O I：
10.1016/j.msea.2012.12.031
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Grade 91 steel is considered a potential structural material for advanced nuclear reactors. The creep deformation behavior of Grade 91 steel was studied in the temperature range of 600-700 degrees C and at stresses of 35-350 MPa. The data were analyzed in terms of Monkman-Grant relation and Larson-Miller parameter. Creep damage tolerance factor and stress exponent were used to identify the cause of creep damage. The fracture surface morphology of the ruptured specimens was studied by scanning electron microscopy to elucidate the failure mechanisms. Fracture mechanism map for Grade 91 steel was developed based on the available material parameters and experimental observations. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：382 / 391
页数：10
相关论文
共 48 条
[31]   Structural materials for Gen-IV nuclear reactors: Challenges and opportunities [J].
Murty, K. L. ;
Charit, I. .
JOURNAL OF NUCLEAR MATERIALS, 2008, 383 (1-2) :189-195
[32]  
Nabarro F.R.N., 1995, PHYS CREEP, P22
[33]   Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600°C for more than 100,000 h [J].
Panait, Clara Gabriela ;
Zielinska-Lipiec, Anna ;
Koziel, Tomasz ;
Czyrska-Filemonowicz, Aleksandra ;
Gourgues-Lorenzon, Anne-Francoise ;
Bendick, Walter .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17) :4062-4069
[34]   Subgrain structure during annealing and creep of the cast martensitic Cr-steel G-X12CrMoWVNbN 10-1-1 [J].
Qin, Y ;
Götz, G ;
Blum, W .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 341 (1-2) :211-215
[35]  
Riedel H., 1987, FRACTURE HIGH TEMPER, P215
[36]   Evaluation of dynamic fracture toughness based reference temperature (T0dy() of modified 9Cr-1Mo steel in phosphorus embrittled and cold-worked condition [J].
Sathyanarayanan, S. ;
Moitra, A. ;
Samuel, K. G. ;
Sasikalaa, G. ;
Ray, S. K. ;
Singh, V. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2) :519-528
[37]   Microstructural degradation of Gr.91 steel during creep under low stress [J].
Sawada, K. ;
Kushima, H. ;
Tabuchi, M. ;
Kimura, K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (16-17) :5511-5518
[38]   Identification of precipitate phases in a 11Cr ferritic/martensitic steel using electron micro-diffraction [J].
Shen, Yin Zhong ;
Kim, Sung Ho ;
Cho, Hai Dong ;
Han, Chang Hee ;
Ryu, Woo Seog .
JOURNAL OF NUCLEAR MATERIALS, 2010, 400 (01) :64-68
[39]   Creep deformation mechanisms in modified 9Cr-1Mo steel [J].
Shrestha, Triratna ;
Basirat, Mehdi ;
Charit, Indrajit ;
Potirniche, Gabriel P. ;
Rink, Karl K. ;
Sahaym, Uttara .
JOURNAL OF NUCLEAR MATERIALS, 2012, 423 (1-3) :110-119
[40]   Long-term creep behavior of 9-12%Cr power plant steels [J].
Sklenicka, V ;
Kucharová, K ;
Svoboda, M ;
Kloc, L ;
Bursik, J ;
Kroupa, A .
MATERIALS CHARACTERIZATION, 2003, 51 (01) :35-48
12345