Forced convective heat transfer by swirling impinging jets issuing from nozzles equipped with twisted tapes

被引:56
作者
Nanan, K. [1 ]
Wongcharee, K. [2 ]
Nuntadusit, C. [3 ]
Eiamsa-ard, S. [1 ]
机构
[1] Mahanakorn Univ Technol, Fac Engn, Dept Mech Engn, Bangkok 10530, Thailand
[2] Mahanakorn Univ Technol, Fac Engn, Dept Chem Engn, Bangkok 10530, Thailand
[3] Prince Songkla Univ, Fac Engn, Dept Mech Engn, Hat Yai 90112, Songkhla, Thailand
关键词
Impinging jet; Round jet; Heat transfer; Swirling jet; TRANSFER ENHANCEMENT; THERMAL PERFORMANCE; TUBE; FLOW; FIELD;
D O I
10.1016/j.icheatmasstransfer.2012.05.002
中图分类号
O414.1 [热力学];
学科分类号
摘要
Forced convective heat transfer on the impinged plate associated with swirling impinging jets (SIJ) issuing from nozzles inserted by twisted tapes has been investigated. Swirling impingement jets with several swirl rates were generated by twisted tapes at different twist ratios (y/W = 3, 4, 5, and 6). The experiments were performed by locating nozzle at 4 different jet-to-plate spacings of L/D = 2, 4, 6 and 8. A jet Reynolds number varied between 4000 and 16000. Attributing to a high momentum transfer rate, an efficient heat transfer was obtained by using the jet with a small jet-to-plate spacing and the twist tape with a large twist ratio at high Reynolds number. At small jet-to-plate spacings (L/D = 2 and 4), swirling impinging jets gave higher heat transfer rate than conventional impinging jets while at large jet-to-plate spacings (L/D = 6 and 8), the opposed result was obtained. Over the range examined, only SIJ induced by the twisted tape at a twist ratio of 6 consistently provided higher average Nusselt numbers than CIJ. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:844 / 852
页数:9
相关论文
共 24 条
[1]   Heat transfer characteristics of impinging air jets under a fixed pumping power condition [J].
Choo, Kyo Sung ;
Kim, Sung Jin .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (1-3) :320-326
[2]   Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes [J].
Eiamsa-ard, S. ;
Wongcharee, K. ;
Eiamsa-ard, P. ;
Thianpong, C. .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2010, 34 (08) :1151-1161
[3]   Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes [J].
Eiamsa-ard, S. ;
Thianpong, C. ;
Eiamsa-ard, P. .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2010, 34 (01) :53-62
[4]   Heat transfer enhancement in a tube using delta-winglet twisted tape inserts [J].
Eiamsa-ard, S. ;
Wongcharee, K. ;
Eiamsa-ard, P. ;
Thianpong, C. .
APPLIED THERMAL ENGINEERING, 2010, 30 (04) :310-318
[5]   3-D Numerical simulation of swirling flow and convective heat transfer in a circular tube induced by means of loose-fit twisted tapes [J].
Eiamsa-ard, S. ;
Wongcharee, K. ;
Sripattanapipat, S. .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (09) :947-955
[6]   Thermal characteristics in round tube fitted with serrated twisted tape [J].
Eiamsa-ard, Smith ;
Promvonge, Pongjet .
APPLIED THERMAL ENGINEERING, 2010, 30 (13) :1673-1682
[7]   Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows [J].
Eiamsa-ard, Smith ;
Seemawute, Panida ;
Wongcharee, Khwanchit .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2010, 34 (06) :711-719
[8]   Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts [J].
Eiamsa-ard, Smith ;
Promvonge, Pongjet .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (7-8) :1364-1372
[9]   Convective heat transfer in a circular tube with short-length twisted tape insert [J].
Eiamsa-ard, Smith ;
Thianpong, Chinaruk ;
Eiamsa-ard, Petpices ;
Promvonge, Pongjet .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (04) :365-371
[10]   Influence of the shape of the nozzle on local heat transfer distribution between smooth flat surface and impinging air jet [J].
Gulati, Puneet ;
Katti, Vadiraj ;
Prabhu, S. V. .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2009, 48 (03) :602-617