Heat transfer of a parallel flow two-layered microchannel heat sink

被引：62

作者：

Wong, Kok-Cheong ^{[1
]}

Muezzin, Fashli Nazhirin Ahmad ^{[1
]}

机构：

[1] Univ Nottingham, Dept Mech Mat & Mfg Engn, Semenyih 43500, Selangor, Malaysia

来源：

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2013年 / 49卷

关键词：

Two-layered microchannel heat sink; Counter flow; Parallel flow; THERMAL PERFORMANCE; NUMERICAL OPTIMIZATION; SIMULATION;

D O I：

10.1016/j.icheatmasstransfer.2013.09.004

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A numerical study is conducted to predict the thermal performance of a parallel flow two-layered microchannel heat sink on heat transfer and compared to the case of counterflow for various channel aspect ratios. Findings reveal that the parallel flow configuration leads to a better heat transfer performance except for high Reynolds number and high channel aspect ratio. Further study on the horizontal rib thickness shows that lower thermal resistance can be achieved in a parallel flow two-layered microchannel heat sink with smaller thickness of middle rib. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：136 / 140

页数：5

共 16 条

[1] Numerical simulation of heat transfer in simultaneously developing flows in parallel rectangular ducts [J].

Al-Bakhit, H ;

Fakheri, A .

APPLIED THERMAL ENGINEERING, 2006, 26 (5-6) :596-603

[2] Numerical simulation of stacked microchannel heat sink with mixing-enhanced passive structure [J].

Cheng, Y. J. .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2007, 34 (03) :295-303

[3] Optimisation of single and double layer counter flow microchannel heat sinks [J].

Chong, SH ;

Ooi, KT ;

Wong, TN .

APPLIED THERMAL ENGINEERING, 2002, 22 (14) :1569-1585

[4] Enhancement of thermal performance in double-layered microchannel heat sink with nanofluids [J].

Hung, Tu-Chieh ;

Yan, Wei-Mon .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (11-12) :3225-3238

[5] Analysis of heat transfer characteristics of double-layered microchannel heat sink [J].

Hung, Tu-Chieh ;

Yan, Wei-Mon ;

Li, Wei-Ping .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (11-12) :3090-3099

[6] Optimal design of geometric parameters of double-layered microchannel heat sinks [J].

Hung, Tu-Chieh ;

Yan, Wei-Mon ;

Wang, Xiao-Dong ;

Huang, Yu-Xian .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (11-12) :3262-3272

[7] High performance forced air cooling scheme employing microchannel heat exchangers [J].

Kleiner, MB ;

Kuhn, SA ;

Haberger, K .

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART A, 1995, 18 (04) :795-804

[8] Effect of substrate thickness and material on heat transfer in microchannel heat sinks [J].

Kosar, Ali .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (04) :635-642

[9] Optimum thermal performance of microchannel heat sink by adjusting channel width and height [J].

Kou, Hong-Sen ;

Lee, Ji-Jen ;

Chen, Chih-Wei .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2008, 35 (05) :577-582

[10]

Lee P.H., 2009, INT J HEAT MASS TRAN, V49, P3060

← 1 2 →