Variable strain rate sensitivity in an aluminum alloy: Response and constitutive modeling

被引：147

作者：

Khan, Akhtar S. ^{[1
]}

Liu, Haowen ^{[1
]}

机构：

[1] Univ Maryland Baltimore Cty, Dept Mech Engn, Baltimore, MD 21250 USA

来源：

INTERNATIONAL JOURNAL OF PLASTICITY | 2012年 / 36卷

关键词：

Polycrystalline material; Constitutive behaviour; Strengthening mechanisms; Rate-dependent material; Variable strain rate sensitivity; WIDE-RANGE; THERMOMECHANICAL RESPONSE; FRACTURE CHARACTERISTICS; LOADING RESPONSES; FCC METALS; TEMPERATURES; BEHAVIOR; STRESS; DRAG; FLOW;

D O I：

10.1016/j.ijplas.2012.02.001

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The thermo-mechanical responses of Al 2024-T351 under uniaxial compression loading are presented. The strain rates include quasi-static regime (10(-4) to 1 s(-1)) and dynamic loading (10(3) s(-1)), at temperatures of 233 K, 296 K, 358 K, 422 K, and 505 K. Below certain threshold temperature, negligible strain rate sensitivity is observed during quasi-static regime, while significant strain rate sensitivity is measured at dynamic strain rates. Above threshold temperature, increasing strain rate sensitivity has been observed. Based on these observations, the Khan-Liu (KL) phenomenological constitutive model is proposed to predict the mechanical behavior of the alloy over wide ranges of strain rate and temperature. Correlations with this modified model are shown very close to the observed responses. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：1 / 14

页数：14

共 34 条

[1] Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models
Abedrabbo, Nader
Pourboghrat, Farhang
Carsley, John
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2007, 23 (05) : 841 - 875
[2] An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin-Le Chatelier effect
Benallal, A.
Berstad, T.
Borvik, T.
Hopperstad, O. S.
Koutiri, I.
de Codes, R. Nogueira
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2008, 24 (10) : 1916 - 1945
[3] Bodner S.R., 1995, AIP C P, pV370
[4] TEMPERATURE AND STRAIN-RATE DEPENDENCE OF SHEAR STRENGTH OF MILD STEEL
CAMPBELL, JD
FERGUSON, WG
[J]. PHILOSOPHICAL MAGAZINE, 1970, 21 (169) : 63 - +
[5] Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality
Clausen, AH
Borvik, T
Hopperstad, OS
Benallal, A
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 364 (1-2): : 260 - 272
[6] STRAIN-RATE EFFECTS ON TENSILE DEFORMATION OF 2024-O AND 7075-O ALUMINUM-ALLOY SHEET
DORWARD, RC
HASSE, KR
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1995, 4 (02) : 216 - 220
[7] Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: Synthesis, experiment, and constitutive modeling
Farrokh, Babak
Khan, Akhtar S.
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (05) : 715 - 732
[8] Follansbee PS., 1986, METALLURGICAL APPL S, P451
[9] Effects of the stress state on plasticity and ductile failure of an aluminum 5083 alloy
Gao, Xiaosheng
Zhang, Tingting
Hayden, Matthew
Roe, Charles
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (12) : 2366 - 2382
[10] MODELING THE MECHANICAL-BEHAVIOR OF 1100-0 ALUMINUM AT DIFFERENT STRAIN RATES BY THE BODNER-PARTOM MODEL
HUANG, S
KHAN, AS
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 1992, 8 (05) : 501 - 517

← 1 2 3 4 →