Effect of tool nose radius in turning of novel Mg alloy

被引:5
作者
Dutta, Sunil [1 ]
Narala, Suresh Kumar Reddy [1 ]
机构
[1] Birla Inst Technol & Sci BITS, Dept Mech Engn, Hyderabad 500078, Telangana, India
关键词
AM alloy; Turning; Nose radius; Cutting force; Cutting temperature;
D O I
10.1016/j.matpr.2020.08.334
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Machining parameters play a significant role in controlling the response variables such as cutting force, temperature, surface roughness, chip shape, etc. Therefore, a judicious selection of machining parameters becomes vital. Many studies have been done to analyze the effect of turning parameters on the response variables in the past. However, the literature on the influence of nose radius has been scanty. In this study, the effect of the nose radius of carbide inserts on the cutting force, cutting temperature, and surface roughness has been analyzed. A novel AM (Mg-7 wt%Al-0.9 wt%Mn) series Mg alloy developed using stir casting has been selected for the turning operation. The results showed that the nose radius has a strong influence on the cutting force and surface roughness. The cutting force is proportional to the nose radius, whereas the surface roughness is inversely proportional to the nose radius. The effect on temperature was lesser compared to the cutting force and surface roughness. Furthermore, the SEM images corroborate the obtained results. (C) 2020 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:2675 / 2679
页数:5
相关论文
共 16 条
[11]   Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC [J].
Ozben, Tamer ;
Kilickap, Erol ;
Cakir, Orhan .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 198 (1-3) :220-225
[12]   Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis [J].
Parida, Asit Kumar ;
Maity, Kalipada .
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2017, 20 (02) :687-693
[13]   Effect of Machining Parameters and Machining Time on Surface Roughness in Dry Turning Process [J].
Qehaja, Nexhat ;
Jakupi, Kaltrine ;
Bunjaku, Avdyl ;
Bruci, Mirlind ;
Osmani, Hysni .
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 :135-140
[14]  
Singh D., 2016, INT J RECENT ADV MEC, V5, P31, DOI DOI 10.14810/IJMECH.2016.5203
[15]   A finite element analysis of orthogonal machining using different tool edge geometries [J].
Yen, YC ;
Jain, AR ;
Altan, T .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 146 (01) :72-81
[16]   Effect of cutting parameters on the dimensional accuracy and surface finish in the hard turning of MDN250 steel with cubic boron nitride tool,for developing a knowledged base expert system [J].
Yousefi, Sasan ;
Zohoor, Mehdi .
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING, 2019, 14 (1)