Surface roughness characteristics of Ti6Al4V alloy in conventional lathe and mill machining

被引：7

作者：

Heretis, Nektarios M. ^{[1
]}

Spanoudakis, Polychronis ^{[1
]}

Tsourveloudis, Nikos ^{[1
]}

机构：

[1] Tech Univ Crete, Dept Prod Engn & Management, Machine Tools Lab, Khania 73100, Crete, Greece

来源：

INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING | 2009年 / 3卷 / 5-6期

关键词：

titanium alloys; Ti6Al4V; surface roughness; TITANIUM-ALLOYS; TOPOGRAPHY; MORPHOLOGY; ADHESION; TOOLS;

D O I：

10.1504/IJSURFSE.2009.029139

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Titanium and titanium alloys are difficult to machine treat in normal conditions. This paper examines the surface roughness of Ti6Al4V alloy after machining in conventional machines with various too] geometries, cutting speeds and lubrication/cooling conditions. The surface roughness of biocompatible Ti6Al4V is important when this titanium alloy is used for cell growth oil human implants. The results reported in this paper may provide a guideline on adhesion, orientation and growth of fibroblast for the Ti6Al4V titanium alloy.

引用

页码：435 / 447

页数：13

共 50 条

[41] Characteristics of wire-electro discharge machined Ti6Al4V surface
Kuriakose, S
Shunmugam, MS
MATERIALS LETTERS, 2004, 58 (17-18) : 2231 - 2237
[42] Characteristics and Wear Performance of Nitrided Ti6Al4V
Siyahjani, Farid
Cimenoglub, Huseyin
DIFFUSION IN SOLIDS AND LIQUIDS VII, 2012, 326-328 : 494 - 497
[43] On the Investigation of Surface Integrity of Ti6Al4V ELI Using Si-Mixed Electric Discharge Machining
Umar Farooq, Muhammad
Pervez Mughal, Mohammad
Ahmed, Naveed
Ahmad Mufti, Nadeem
Al-Ahmari, Abdulrahman M.
He, Yong
MATERIALS, 2020, 13 (07)
[44] Characteristics and wear performance of bonded Ti6Al4V alloy prepared by double glow plasma surface alloying
Qin, Lin
Liu, Chengsong
Yang, Kunkun
Tang, Bin
SURFACE & COATINGS TECHNOLOGY, 2013, 225 : 92 - 96
[45] Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy
Rashid, R. A. Rahman
Palanisamy, S.
Sun, S.
Dargusch, M. S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (9-12) : 1457 - 1465
[46] Intelligent Machine Learning Strategies for Minimizing Machining Power in Minimum Quantity Lubrication Machining of Ti6Al4V Alloy
Sarma, Dhrubajit
Ozah, Rupshree
Borah, Jyotisman
Chandrasekaran, Muthumari
Sahoo, Ashok Kumar
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
[47] Numerical simulation and experimental investigation of laser joining Ti6Al4V alloy and CFRTP with embedded Ti6Al4V alloy
Xu, Ying
Bu, Hengchang
Wang, Feiyun
Ma, Wanping
Zhan, Xiaohong
OPTICS AND LASER TECHNOLOGY, 2022, 156
[48] Utilising of water hammer effect for surface roughening of Ti6Al4V
Klichova, Dagmar
Nag, Akash
Poloprudsky, Jakub
Foldyna, Josef
Pude, Frank
Sitek, Libor
Hloch, Sergej
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (11-12) : 5633 - 5647
[49] Metrological evaluation of the tribological behavior of laser surface treated Ti6Al4V alloy
Vazquez-Martinez, J. M.
Salguero, J.
Botana, F. J.
Contreras, J. P.
Fernandez-Vidal, S. R.
Marcos, M.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 752 - 760
[50] Effects of surface pretreatments and coating period on hydroxyapatite coating of Ti6Al4V alloy
Hacioglu, T.
Evis, Z.
Tezcaner, A.
Aydinol, M. K.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2020, 56 (02) : 545 - 557

← 1 2 3 4 5 →