Ceramic membrane by tape casting and sol-gel coating for microfiltration and ultrafiltration application

被引:32
|
作者
Das, Nandini [1 ]
Maiti, H. S. [1 ]
机构
[1] CSIR, Cent Glass & Ceram Res Inst, Sol Gel Div, Kolkata 700032, India
关键词
Ceramics; Microporous materials; Sol-gel growth; Thermogravimetric analysis; Electron microscopy; ALUMINA MEMBRANES; PORES; NEEDS;
D O I
10.1016/j.jpcs.2009.08.016
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Alumina membrane filters in the form of thin (0.3-0.8 mm) discs of 25-30 mm diameter suitable for microfiltration application have been fabricated by tape-casting technique. Further using this microfiltration membrane as substrate, boehmite sol coating was applied on it and ultrafiltration membrane with very small thickness was formed. The pore size of the microfiltration membrane could be varied in the range of 0.1-0.7 mu m through optimisation of experimental parameter. In addition, each membrane shows a very narrow pore size distribution. The most important factor, which determines the pore size of the membrane, is the initial particle size and its distribution of the ceramic powder. The top thin ultrafiltration, boehmite layer was prepared by sol-gel method, with a thickness of 0.5 mu m. particle size of the sol was approximately 30-40 nm. The structure and formation of the layer was analysed through TEM. At 550 degrees C formation of the top layer was completed. The pore size of the ultrafiltration membrane measured from TEM micrograph was almost 10 nm. Results of microbial (Escherichia coli-smallest-sized water-borne bacteria) test confirm the possibility of separation through this membrane (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1395 / 1400
页数:6
相关论文
共 50 条
  • [41] Hybrid sol-gel coating on Al
    Arslan, O.
    Arpac, E.
    Sayilkan, F.
    Sayilkan, H.
    JOURNAL OF MATERIALS SCIENCE, 2007, 42 (06) : 2138 - 2142
  • [42] Sol-Gel Route and Characterization of Supported Perovskites for Membrane Application
    V. Kozhukharov
    M. Machkova
    N. Brashkova
    Ch. Trapalis
    Journal of Sol-Gel Science and Technology, 2003, 26 : 753 - 757
  • [43] Sol-gel route and characterization of supported perovskites for membrane application
    Kozhukharov, V
    Machkova, M
    Brashkova, N
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2003, 26 (1-3) : 753 - 757
  • [45] Preparation and Characterization of a Poly(vinyl alcohol)/Tetraethoxysilane Ultrafiltration Membrane by a Sol-Gel Method
    Yuan, Haikuan
    Ren, Jie
    Cheng, Liang
    Shen, Lian
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (06) : 4066 - 4074
  • [46] Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount
    Kahlib, N. A. Z.
    Daud, F. D. M.
    Mel, M.
    Hairin, A. L. N.
    Azhar, A. Z. A.
    Hassan, N. A.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017), 2018, 290
  • [47] Polysulfone/TiO2 hybrid ultrafiltration membrane prepared by the sol-gel process
    Yang, YN
    Wang, P
    Zheng, QZ
    ACTA CHIMICA SINICA, 2006, 64 (06) : 569 - 573
  • [48] Novel fabrication processing of porous alumina/mullite membrane supports by combining direct foaming, sol-gel, and tape-casting methods
    Dong, Binbin
    Yang, Mingye
    Wang, Feihong
    Hao, Luyuan
    Xu, Xin
    Wang, Gang
    Agathopoulos, Simeon
    MATERIALS LETTERS, 2019, 240 : 140 - 143
  • [49] Nanostructure-induced icephobic sol-gel coating for glass application
    Qian, M.
    Tan, G. H.
    Lee, Z. Y.
    Koh, C. W.
    Wu, Linda Y. L.
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2017, 81 (01) : 127 - 137
  • [50] Preparation of Aluminum Composite Ceramic Membrane by Inorganic Precursor Sol-gel Method
    Liu Shu Heng
    Guo Lin Lin
    Wang Qian Ping
    MATERIALS, MECHANICAL ENGINEERING AND MANUFACTURE, PTS 1-3, 2013, 268-270 : 55 - +