Powder eutectic coating with Al3Ti for steels

被引：8

作者：

Kafuku, H ^{[1
]}

Tomota, Y

Isaka, M

Suzuki, T

机构：

[1] Ibaraki Univ, Dept Sci & Engn, Ibaraki, Japan

[2] Mitsubishi Heavy Ind Co Ltd, Takasago, Hyogo 6768686, Japan

[3] Ibaraki Univ, Dept Mat Sci, Fac Engn, Hitachi, Ibaraki 3168511, Japan

[4] Hitachi Tool Engn Ltd, Narita 2860825, Japan

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2002年 / 33卷 / 10期

关键词：

Material Transaction; Pure Iron; Coated Layer; Backscatter Electron Imaging Mode; Commercial Pure Iron;

D O I：

10.1007/s11661-002-0309-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Plates and round bars made of a pure iron or a carbon steel (JIS-S45C) have successfully been coated with Al3Ti powder by the "powder eutectic coating" method. The coated layers are found to show graded microstructures, where the concentrations of Fe, Al, and Ti change gradually from the surface toward the inside of a specimen. The microstructure of the coated layer consists of Al3Ti, 73 (Al22Fe3Ti8), tau2 (Al2FeTi), and B2 (FeAl). When the coated specimens were subjected to heat-cycling tests between 293 and 973 K, they showed no cracking, no peeling. little oxidation, and no significant changes in microstructure.

引用

页码：3235 / 3240

页数：6

共 4 条

[1] Application of an intermetallic compound Ti5Si3 to functionally graded materials.
Kirihara, S
Tomota, Y
Tsujimoto, T
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 : 600 - 604
[2] Kirihara S., 1999, Materials Science Forum, V308-311, P238, DOI 10.4028/www.scientific.net/MSF.308-311.238
[3] The Fe-Al-Ti system
Palm, M
Inden, G
Thomas, N
[J]. JOURNAL OF PHASE EQUILIBRIA, 1995, 16 (03): : 209 - 222
[4] Functionally graded coating for steels by reaction diffusion using FeAl3 powder
Tsuchida, Y
Kirihara, S
Tomota, Y
[J]. ISIJ INTERNATIONAL, 2000, 40 (10) : 1029 - 1034

← 1 →