A Short Review on the Phase Structures, Oxidation Kinetics, and Mechanical Properties of Complex Ti-Al Alloys

被引：30

作者：

Lim, Hooi Peng ^{[1
]}

Liew, Willey Yun Hsien ^{[1
]}

Melvin, Gan Jet Hong ^{[1
]}

Jiang, Zhong-Tao ^{[2
]}

机构：

[1] Univ Malaysia Sabah, Fac Engn, Jalan UMS, Kota Kinabalu 88400, Sabah, Malaysia

[2] Murdoch Univ, Surface Anal & Mat Engn Res Grp, Chem & Phys, Coll Sci Hlth Engn & Educ, Perth, WA 5150, Australia

来源：

MATERIALS | 2021年 / 14卷 / 07期

关键词：

phase structures; oxidation kinetics; oxide scales; Ti-Al alloys; alloying elements;

D O I：

10.3390/ma14071677

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This paper reviews the phase structures and oxidation kinetics of complex Ti-Al alloys at oxidation temperatures in the range of 600-1000 degrees C. The mass gain and parabolic rate constants of the alloys under isothermal exposure at 100 h (or equivalent to cyclic exposure for 300 cycles) is compared. Of the alloying elements investigated, Si appeared to be the most effective in improving the oxidation resistance of Ti-Al alloys at high temperatures. The effect of alloying elements on the mechanical properties of Ti-Al alloys is also discussed. Significant improvement of the mechanical properties of Ti-Al alloys by element additions has been observed through the formation of new phases, grain refinement, and solid solution strengthening.

引用

页数：24

共 78 条

[1]

Adler T.A., 2003, CORROSION FUNDAMENTA

[2] HALL-PETCH RELATIONS FOR MULTILAYERED MATERIALS [J].

ANDERSON, PM ;

LI, C .

NANOSTRUCTURED MATERIALS, 1995, 5 (03) :349-362

[3] MECHANISM OF ISOTHERMAL OXIDATION OF THE INTERMETALLIC TIAL AND OF TIAL ALLOYS [J].

BECKER, S ;

RAHMEL, A ;

SCHORR, M ;

SCHUTZE, M .

OXIDATION OF METALS, 1992, 38 (5-6) :425-464

[4]

Birks N, 2006, INTRODUCTION TO THE HIGH-TEMPERATURE OXIDATION OF METALS, 2ND EDITION, P1, DOI 10.1017/CBO9781139163903

[5] The oxidation and protection of gamma titanium aluminides [J].

Brady, MP ;

Brindley, WJ ;

Smialek, JL ;

Locci, IE .

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1996, 48 (11) :46-50

[6] Role of Si on lamellar formation and mechanical response of two SPS Ti-15Al-15Si and Ti-10Al-20Si intermetallic alloys [J].

Cabibbo, M. ;

Knaislova, A. ;

Novak, P. ;

Prusa, F. ;

Paoletti, C. .

INTERMETALLICS, 2021, 131

[7] Oxidation behavior of a high Si content Al-Si composite coating fabricated on Ti-6Al-4V substrate by mechanical alloying method [J].

Chen, Cheng ;

Feng, Xiaomei ;

Shen, Yifu .

JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 701 :27-36

[8] Thermodynamic analysis of interactions between Ti-Al alloys and oxide ceramics [J].

Cui Ren-jie ;

Tang Xiao-xia ;

Gao Ming ;

Zhang Hu ;

Gong Sheng-kai .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (04) :887-894

[9] Microstructure and high temperature oxidation behavior of Ti-Al-Nb-Si coatings on Ti-6Al-4V alloy [J].

Dai, Jingjie ;

Zhang, Nianlong ;

Wang, Amin ;

Zhang, Hongxia ;

Chen, Chuanzhong .

JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 765 :46-57

[10] Microstructure and high-temperature oxidation resistance of Ti-Al-Nb coatings on a Ti-6Al-4V alloy fabricated by laser surface alloying [J].

Dai, Jingjie ;

Li, Shouying ;

Zhang, Hongxia ;

Yu, Huijun ;

Chen, Chuanzhong ;

Li, Yang .

SURFACE & COATINGS TECHNOLOGY, 2018, 344 :479-488

← 1 2 3 4 5 6 7 8 →