Turning process monitoring of internal combustion engine piston's cylindrical surface

被引：1

作者：

Twardowski, Pawel ^{[1
]}

Tabaszewski, Maciej ^{[2
]}

Wojciechowski, Szymon ^{[1
]}

机构：

[1] Poznan Univ Tech, Inst Mech Technol, Fac Mech Engn & Management, Poznan, Poland

[2] Poznan Univ Tech, Inst Appl Mech, Fac Mech Engn & Management, Poznan, Poland

来源：

21ST INNOVATIVE MANUFACTURING ENGINEERING & ENERGY INTERNATIONAL CONFERENCE - IMANE&E 2017 | 2017年 / 112卷

关键词：

TOOL; FORCES; SYSTEM;

D O I：

10.1051/matecconf/201711210002

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this paper the monitoring method of turning process of combustion engine piston's cylindrical surface is proposed. During this process, the PCD diamond tool cuts the piston's cylindrical surface with the 3 grooves. The first groove is made in the cast iron insert. In case, when the machining allowances are selected inappropriately, the tool cuts the cast iron insert and consequently generates the reject. The proposed monitoring system based on vibration signals analysis enables the detection of these critical situations and react, in order to maintain the production quality.

引用

页数：6

共 10 条

[1]

Gierlak P., MECH SYSTEMS SIGNAL

[2] Formation of surface layer in metal matrix composite A359/20SiCP during laser assisted turning [J].

Przestacki, D. ;

Szymanski, P. ;

Wojciechowski, S. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 91 :370-379

[3] Surface roughness analysis after laser assisted machining of hard to cut materials [J].

Przestacki, D. ;

Jankowiak, M. .

14TH INTERNATIONAL CONFERENCE ON METROLOGY AND PROPERTIES OF ENGINEERING SURFACES (MET & PROPS 2013), 2014, 483

[4] Conventional and laser assisted machining of composite A359/20SiCp [J].

Przestacki, Damian .

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 :229-233

[5] An industrial tool wear monitoring system for interrupted turning [J].

Scheffer, C ;

Heyns, PS .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2004, 18 (05) :1219-1242

[6] Development of a tool wear-monitoring system for hard turning [J].

Scheffer, C ;

Kratz, H ;

Heyns, PS ;

Klocke, F .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (10) :973-985

[7] Precision surface characterization for finish cylindrical milling with dynamic tool displacements model [J].

Wojciechowski, S. ;

Twardowski, P. ;

Pelic, M. ;

Maruda, R. W. ;

Barrans, S. ;

Krolczyk, G. M. .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 46 :158-165

[8] Investigation on the edge forces in ball end milling of inclined surfaces [J].

Wojciechowski, Szymon ;

Maruda, Radoslaw W. ;

Nieslony, Piotr ;

Krolczyk, Grzegorz M. .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 119 :360-369

[9] Cutting forces and vibrations during ball end milling of inclined surfaces [J].

Wojciechowski, Szymon ;

Twardowski, Pawel ;

Pelic, Marcin .

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 :113-118

[10] Tool life and process dynamics in high speed ball end milling of hardened steel [J].

Wojciechowski, Szymon ;

Twardowski, Pawel .

FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 :289-294

← 1 →