Novel silk fibroin/hydroxyapatite composite films: Structure and properties

Novel composite films of Bombyx mori silk fibroin (SF) and hydroxyapatite (HA) composite films, with glycerin as an additive, were fabricated by means of co-precipitation, where the theoretical HA content was varied from 2 (w/w)% to 31 (w/w)%. The structure and properties of the composite films were investigated by SEM, XRD. AFM, TGA and tensile testing. The results showed that the composite films were smooth and transparent with the uniform distribution of HA into the composites when the final HA content was lower than 21 (w/w)%. XRD and TGA data showed that the silk fibroin in the composites was predominantly in a beta-sheet crystalline structure, which was induced not only by the addition of glycerin, also by the HA crystal growth during the composite fabrication, leading to the thermal stable composite films. On the other hand, the HA crystals had the anisotropic growth with high extent of lattice imperfection and the preferential orientation along c-axis, probably promoted by the silk fibroin. The mechanical testing results showed that both break strain and stress were declined with the increase of HA content in the composites, presumably due to the original brittleness of HA compound. (C) 2008 Elsevier B.V. All rights reserved.