Environmental effect on fatigue life of glass-epoxy composite pipes subjected to impact loading

被引：49

作者：

Deniz, Mehmet Emin ^{[1
]}

Ozen, Mustafa ^{[1
]}

Ozdemir, Okan ^{[1
]}

Karakuzu, Ramazan ^{[1
]}

Icten, Bulent Murat ^{[1
]}

机构：

[1] Dokuz Eylul Univ, Dept Mech Engn, TR-35100 Izmir, Turkey

来源：

COMPOSITES PART B-ENGINEERING | 2013年 / 44卷 / 01期

关键词：

Polymer-matrix composites (PMCs); Fatigue; Impact behavior; Filament winding; Environmental effect; FILAMENT-WOUND PIPES; GRP PIPES; FAILURE BEHAVIOR; BURST STRENGTH; SURFACE CRACK; PRESSURE; DAMAGE; GROWTH;

D O I：

10.1016/j.compositesb.2012.05.001

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The main objective of this experimental study was to investigate the effects of seawater and impact loading on the fatigue life of glass-epoxy composite pipes under cyclic internal pressure. The pipes were produced by filament winding technique. Composite specimens were immersed in seawater for periods of 3, 6, and 9 months. After the impact tests are carried out at three different energy levels (5, 7.5, and 10 J), fatigue tests were conducted on the specimens. It is seen from results that fatigue life changes according to both impact energy and seawater immersion time. Fatigue life of non-impacted specimen is greater than the impacted one. Fatigue life increases in the impacted specimens up to 3 months and reaches generally maximum value. After that it decreases with increase in seawater immersion time. During the fatigue tests, fatigue damage types named perspiration, leakage, and eruption were observed. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：304 / 312

页数：9

共 29 条

[11] Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure [J].

Gemi, Lokman ;

Tarakcioglu, Necmettin ;

Akdemir, Ahmet ;

Sahin, Oeer Sinan .

MATERIALS & DESIGN, 2009, 30 (10) :4293-4298

[12] Prediction of damage in composite cylinders after impact [J].

Gning, PB ;

Tarfaoui, M ;

Collombet, F ;

Davies, P .

JOURNAL OF COMPOSITE MATERIALS, 2005, 39 (10) :917-928

[13] First-ply failure strength of laminated composite pressure vessels [J].

Kam, TY ;

Liu, YW ;

Lee, FT .

COMPOSITE STRUCTURES, 1997, 38 (1-4) :65-70

[14] Finite element method failure analysis of a pressurized FRP cylinder under transverse impact loading [J].

Kaneko, Tomonori ;

Ujihashi, Sadayuki ;

Yomoda, Hidetoshi ;

Inagi, Shusuke .

THIN-WALLED STRUCTURES, 2008, 46 (7-9) :898-904

[15]

Karakuzu R, 2011, INT C COMP TEST MOD, P143

[16] Low-speed impact damage in filament-wound CFRP composite pressure vessels [J].

Matemilola, SA ;

Stronge, WJ .

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1997, 119 (04) :435-443

[17] Impact response of composite cylinders [J].

Matemilola, SA ;

Stronge, WJ .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1997, 34 (21) :2669-2684

[18] A failure envelope for +/-60° filament wound glass fibre reinforced epoxy tubulars [J].

Meijer, Garret ;

Ellyin, Fernand .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (03) :555-564

[19] Burst failure load of composite pressure vessels [J].

Onder, Aziz ;

Sayman, Onur ;

Dogan, Tolga ;

Tarakcioglu, Necmettin .

COMPOSITE STRUCTURES, 2009, 89 (01) :159-166

[20] Fatigue Crack Growth Behavior of Filament Wound Composite Pipes in Corrosive Environment [J].

Sahin, Oemer Sinan ;

Akdemir, Ahmet ;

Avci, Ahmet ;

Gemi, Lokman .

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (24) :2957-2970

← 1 2 3 →