Importance of precursor type in fabricating ZnO thin films for photocatalytic applications

Here, the importance of choosing an appropriate precursor with right molarity for the fabrication of zinc oxide (ZnO) films by spray pyrolysis for the photocatalytic application is reported. Films were grown on glass substrates by using three different zinc precursors such as zinc acetate, zinc chloride, and zinc acetylacetonate. The structural, morphological, and optical characterizations were performed on the ZnO films. A preferential orientation along (002) plane, crystallite size distribution in the range 21-59 nm, and the nanostructures such as nanothorns, hexagonal nanorods, hexagonal layers and elongated grains, were acquired from the characterization studies. Further, the photocatalytic activity was tested using indigo carmine dye, obtaining 100% of dye degradation using the ZnO thin films deposited with zinc acetate, whereas films from zinc chloride and zinc acetylacetonate precursors showed 20% and 10% of degradation respectively.