A comprehensive electromagnetic forming approach for large sheet metal forming

被引：24

作者：

Lai, Zhipeng ^{[1
]}

Cao, Quanliang ^{[1
]}

Han, Xiaotao ^{[1
]}

Liu, Ning ^{[1
]}

Li, Xiaoxiang ^{[1
]}

Huang, Yujie ^{[1
]}

Chen, Meng ^{[1
]}

Cai, Hong ^{[1
]}

Wang, Guangda ^{[1
]}

Liu, Liangyun ^{[1
]}

Guo, Wenzhang ^{[1
]}

Chen, Qi ^{[1
]}

Li, Liang ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, Wuhan Natl High Magnet Field Ctr, Wuhan 430074, Peoples R China

来源：

INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 | 2017年 / 207卷

关键词：

Large sheet forming; Electromagnetic forming; Lorentz force; Forming cost; Forming quality;

D O I：

10.1016/j.proeng.2017.10.737

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

By exploiting the potential advantages of electromagnetic forming, a comprehensive approach has been developed for large sheet metal forming. In this study, this approach was applied to form an aluminum alloy sheet into partial ellipsoid shape. The sheet is with a diameter of 1378 mm, and a thickness of 3.945 mm. Compared to conventional forming process, the forming facility is very light-weight, and has following dimension: a width of 1840 mm, a length of 1840 mm, and a height of 1800 mm. An experiment was performed to evaluate the forming quality obtained by the proposed facility. The profile of the formed sheet was measured and fitting with the die profile to assess the deviation between the formed sheet and the desired shape. About 60% of the sheet area has the deviation with the desired shape less than 1 mm. The thickness was measured to evaluate the thinning of the formed sheet. The maximum thinning over the ellipsoid surface of the formed sheet is only about 9.48%. This study proves the feasibility of the proposed process, which provides a cost-effective method for large sheet metal forming. (C) 2017 The Authors. Published by Elsevier Ltd. Peer-review under responsibility of the scientific committee of the International Conference on the Technology of Plasticity.

引用

页码：54 / 59

页数：6

共 15 条

[11] An investigation of enhanced formability in AA5182-O Al during high-rate free-forming at room-temperature: Quantification of deformation history [J].

Rohatgi, Aashish ;

Soulami, Ayoub ;

Stephens, Elizabeth V. ;

Davies, Richard W. ;

Smith, Mark T. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (03) :722-732

[12]

Vohnut V. J., 1998, THESIS

[13] New development on technology and equipment of sheet hydroforming [J].

Yuan, Shijian ;

Liu, Wei ;

Xu, Yongchao .

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2015, 51 (08) :20-28

[14]

Zhang SH, 2004, J MATER PROCESS TECH, V151, P237, DOI [10.1016/j.jmatprotec.2004.04.054, 10.1016/j.matprotec.2004.04.054]

[15]

TITLE ERROR

← 1 2 →