Isothermal sections in the (Fe, Ni)-rich part of the Fe-Ni-Al phase diagram

被引:22
作者
Chumak, Igor [1 ,2 ]
Richter, Klaus W. [1 ]
Ipser, Herbert [1 ]
机构
[1] Univ Vienna, Dept Inorgan Chem Mat Chem, A-1090 Vienna, Austria
[2] Ivan Franko Natl Univ Lviv, Dept Inorgan Chem, UA-79005 Lvov, Ukraine
关键词
aluminum alloys; electron probe microanalysis (EPMA); experimental phase equilibria; x-ray analysis;
D O I
10.1007/s11669-008-9319-7
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The ternary Fe-Ni-Al phase diagram below 50 at.% Al was investigated by a combination of powder x-ray diffraction (XRD) and electron probe microanalysis (EPMA). Ternary phase equilibria and accurate phase compositions of the respective equilibrium phases were determined within the partial isothermal sections at 900, 1000, 1100 and 1200 degrees C.
引用
收藏
页码:300 / 304
页数:5
相关论文
共 11 条
[1]  
BRADLEY AJ, 1949, J IRON STEEL I, V163, P19
[2]  
BRADLEY AJ, 1951, J IRON STEEL I, V168, P233
[3]  
*BRUK AXS, 2005, GEN PROF STRUCT AN S
[4]   Experimental phase diagram investigations in the ni-rich part of al-fe-ni and comparison with calculated phase epuilibria [J].
Chumak, Igor ;
Richter, Klaus W. ;
Fries, Suzana G. ;
Ipser, Herbert .
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2007, 28 (05) :417-421
[5]   The Fe-Ni-Al phase diagram in the Al-rich (>50 at% Al) corner [J].
Chumak, Igor ;
Richter, Klaus W. ;
Ipser, Herbert .
INTERMETALLICS, 2007, 15 (11) :1416-1424
[6]   Assessment of the Fe-Ni-Al system [J].
Eleno, Luiz ;
Frisk, Karin ;
Schneider, Andre .
INTERMETALLICS, 2006, 14 (10-11) :1276-1290
[7]  
Hao S. M., 1984, METALL T A, V15, P1819
[8]   Stability of ordered L12 phase in Ni3Fe-Ni3X (X:Si and Al) pseudobinary alloys [J].
Himuro, Y ;
Tanaka, Y ;
Kamiya, N ;
Ohnuma, I ;
Kainuma, R ;
Ishida, K .
INTERMETALLICS, 2004, 12 (06) :635-643
[9]   PARTITION OF ALLOYING ELEMENTS BETWEEN GAMMA-(A1), GAMMA(')-(L12), AND BETA-(B2) PHASES IN NI-AL BASE SYSTEMS [J].
JIA, CC ;
ISHIDA, K ;
NISHIZAWA, T .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (03) :473-485
[10]  
Letzig D, 1999, Z METALLKD, V90, P712