Plasma spraying of zirconia-reinforced hydroxyapatite composite coatings on titanium .2. Dissolution behaviour in simulated body fluid and bonding degradation

The change of phase, morphology and bond strength of plasma sprayed hydroxyapatite (HA) coating and ZrO2/HA composite coatings immersed in simulated body fluid (SBF) for various periods of time was studied. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) were used to identify the phase and observe the morphology of the coating surface before and after immersion. In addition, inductively coupled plasma emission spectroscopy (ICP) was used to measure the ion release rate of coatings in SBF for various periods of time. Observation of the morphology by SEM shows that the composite coating with the addition of ZrO2 in HA significantly reduced the dissolution rate of im purity phases in simulated body fluid. The argument was supported by measurement of Ca2+ ion concentration in SBF. During plasma spraying, less OH- ions were lost in a ZrO2-containing composite coating. This factor, together with the reduced effective surface of the ZrO2-containing HA coating, were attributed to the reduced dissolution rate of the composite coatings. All the plasma sprayed coatings degraded after immersion in SBF owing to dissolution of constituents in the coating, however, the addition of ZrO2 in HA improved the bonding strength of HA coating after immersion in SBF.