Simplified method for analyzing soil slope deformation under cyclic loading

Reasonable assessment of slope deformation under cyclic loading is of great significance for securing the safety of slopes. The observations of centrifuge model tests are analyzed on the slope deformation behavior under cyclic loading conditions. The potential slip surface is the key for slope failure and follows two rules: (i) the relative horizontal displacement along the potential slip surface is invariable at an elevation, and (ii) the soil along the slip surface exhibits the same degradation pattern. These rules are effective regardless of the location of the potential slip surface throughout the entire deformation process of a homogeneous slope, ranging from the initial deformation stage to the failure process and to the post-failure stage. A new, simplified method is proposed by deriving the displacement compatibility equation and unified degradation equation according to the fundamental rules. The method has few parameters that can be determined through traditional element tests. The predictions from the proposed method agree with the centrifuge test results with vertical loading and shaking table loading. This result confirms that the proposed method is effective in predicting the full deformation process of slopes under different cyclic loading conditions. (C) 2022 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).