Strength Properties of Ultrasonic-Assisted Laser Welded Stainless Steel 321

被引：8

作者：

Kalashnikov, K. N. ^{[1
]}

Zhukov, L. L. ^{[1
]}

Kalashnikova, T. A. ^{[1
]}

Dmitriev, A. V. ^{[1
]}

机构：

[1] RAS, Inst Strength Phys & Mat Sci SB, Tomsk 634055, Russia

来源：

PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES | 2018年 / 2051卷

关键词：

D O I：

10.1063/1.5083356

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Mechanical characteristics of laser welded stainless steel 321 joints are mainly determined by the welding process parameters such as welding speed and shielding gas feed rate. Small deviation from their optimal values may result in formation of a defect and reducing the joint strength. The use of ultrasonic-assisted laser welding procedure allows expanding the optimal range of the process parameters without affecting the joint strength. In this paper, it is revealed that the stainless steel samples obtained by the laser welding at various regimes have tensile strength from 579 to 592 MPa. In turn, the use of ultrasonic made it possible to obtain welds with a strength changes from 607 to 612 MPa.

引用

页数：4

共 5 条

[1] Effect of welding speed on butt joint quality of Ti-6Al-4V alloy welded using a high-power Nd:YAG laser
Cao, X.
Jahazi, M.
[J]. OPTICS AND LASERS IN ENGINEERING, 2009, 47 (11) : 1231 - 1241
[2] Study on laser welding of austenitic stainless steel by varying incident angle of pulsed laser beam
Kumar, Nikhil
Mukherjee, Manidipto
Bandyopadhyay, Asish
[J]. OPTICS AND LASER TECHNOLOGY, 2017, 94 : 296 - 309
[3] Optimizing pulsed Nd:YAG laser beam welding process parameters to attain maximum ultimate tensile strength for thin AISI316L sheet using response surface methodology and simulated annealing algorithm
Torabi, Amir
Kolahan, Farhad
[J]. OPTICS AND LASER TECHNOLOGY, 2018, 103 : 300 - 310
[4] Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding
Yan, Jun
Gao, Ming
Zeng, Xiaoyan
[J]. OPTICS AND LASERS IN ENGINEERING, 2010, 48 (04) : 512 - 517
[5] Study of microstructural inhomogeneity and its effects on mechanical properties of multi-layer laser welded joint
Zhang, Xiong
Mi, Gaoyang
Li, Shuo
Hu, Xiyuan
Wang, Chunming
Zhang, Yuelai
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (5-8) : 2163 - 2174

← 1 →