Torsional Shear Strength of Silicon Carbide Components Pressurelessly Joined by a Glass-Ceramic

被引：31

作者：

Ferraris, Monica ^{[1
]}

Salvo, Milena ^{[1
]}

Rizzo, Stefano ^{[1
]}

Casalegno, Valentina ^{[1
]}

Han, Shaohua ^{[1
]}

Ventrella, Andrea ^{[1
]}

Hinoki, Tatsuya ^{[2
]}

Katoh, Yutai ^{[3
]}

机构：

[1] Politecn Torino, Inst Mat Phys & Engn, Dept Appl Sci & Technol, I-10129 Turin, Italy

[2] Kyoto Univ, Inst Adv Energy, Uji, Kyoto 6110011, Japan

[3] Oak Ridge Natl Lab, Mat Sci & Technol Div, Oak Ridge, TN 37831 USA

来源：

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2012年 / 9卷 / 04期

关键词：

COMPOSITES;

D O I：

10.1111/j.1744-7402.2012.02775.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Silicon carbide (SiC) samples have been joined by a pressureless slurry based method. The CaOAl2O3 (CA) glass-ceramic joining material has been characterized in term of crystalline phases and thermal and mechanical properties. A torsion test based on miniaturized hourglass shaped specimens has been used as pure shear strength test method for joined ceramic samples. Torsion results are compared to those obtained by a single lap offset (SLO) test in compression on the same joined materials. Pure shear strength of 104 +/- 25 MPa has been measured by torsion test, whereas single lap offset gave 36 +/- 8 MPa.

引用

页码：786 / 794

页数：9

共 24 条

[1] Adams R.D., 1997, STRUCTURAL ADHESIVE
[2] [Anonymous], F136297 ASTM INT, DOI [10.1520/F1362-97, DOI 10.1520/F1362-97]
[3] [Anonymous], C146910 ASTM INT, DOI [10.1520/C14-69-10, DOI 10.1520/C14-69-10]
[4] [Anonymous], F73495 ASTM INT, DOI [10.1520/F0734-95R06, DOI 10.1520/F0734-95R06]
[5] Avalle M., 2006, P 8 BIENN ASME C ENG
[6] Feinroth H., 2009, P 33 INT C ADV CER D
[7] Joining of SiC-based materials for nuclear energy applications
Ferraris, M.
Salvo, M.
Casalegno, V.
Han, S.
Katoh, Y.
Jung, H. C.
Hinoki, T.
Kohyarna, A.
[J]. JOURNAL OF NUCLEAR MATERIALS, 2011, 417 (1-3) : 379 - 382
[8] Ferraris M, 2010, CERAM TRANS, V220, P173
[9] Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon composites
Ferraris, M.
Ventrella, A.
Salvo, M.
Avalle, M.
Pavia, F.
Martin, E.
[J]. COMPOSITES PART B-ENGINEERING, 2010, 41 (02) : 182 - 191
[10] Glass-ceramic joining and coating of SiC/SiC for fusion applications
Ferraris, M
Salvo, M
Isola, C
Montorsi, MA
Kohyama, A
[J]. JOURNAL OF NUCLEAR MATERIALS, 1998, 258 : 1546 - 1550

← 1 2 3 →