Advanced damper with high stiffness and high hysteresis damping based on negative structural stiffness

被引：81

作者：

Dong, Liang ^{[1
]}

Lakes, Roderic ^{[2
,3
]}

机构：

[1] Univ Virginia, Dept Mat Sci & Engn, Charlottesville, VA 22904 USA

[2] Univ Wisconsin, Mat Sci Program, Madison, WI 53706 USA

[3] Univ Wisconsin, Dept Engn Phys, Madison, WI 53706 USA

来源：

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES | 2013年 / 50卷 / 14-15期

关键词：

Damping; Stiffness; Columns; Buckling; Uniaxial Compression; Experimental techniques; Structures; COMPOSITE-MATERIALS;

D O I：

10.1016/j.ijsolstr.2013.03.018

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

High structural damping combined with high stiffness is achieved by negative stiffness elements. Negative incremental structural stiffness occurs when a column with flat ends is subjected to snap-through buckling. Large hysteresis (i.e., high damping) can be achieved provided the ends of the column undergo tilting from flat to edge contact. The column configuration provides high structural stiffness. Stable axial dampers with initial modulus similar to that of the parent material and with enhanced damping were designed built and tested. Effective damping of approximately two and stiffness-damping product of approximately 200 GPa were achieved in such dampers consisting of stainless steel columns. This is a significant improvement for this figure of merit (i.e., the stiffness-damping product), which generally cannot exceed 0.6 GPa for currently used damping systems. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：2416 / 2423

页数：8

共 16 条

[1]

Bazant Z. P., 1991, Stability of structures: Elastic, Inelastic, Fracture and Damage Theories

[2] Advanced damper with negative structural stiffness elements [J].

Dong, Liang ;

Lakes, Roderic S. .

SMART MATERIALS AND STRUCTURES, 2012, 21 (07)

[3] Extreme anelastic responses in Zn80Al20 matrix composite materials containing BaTiO3 inclusion [J].

Dong, Liang ;

Stone, Donald S. ;

Lakes, Roderic S. .

SCRIPTA MATERIALIA, 2011, 65 (04) :288-291

[4] Negative stiffness of a layer with topologically interlocked elements [J].

Estrin, Y ;

Dyskin, AV ;

Pasternak, E ;

Schaare, S ;

Stanchits, S ;

Kanel-Belov, AJ .

SCRIPTA MATERIALIA, 2004, 50 (02) :291-294

[5]

Haberman M. R., 2012, J ACOUST SOC AM, V131, P3372, DOI DOI 10.1121/1.4708717

[6]

HIBBELER RC, 1991, MECH MAT

[7] Composite materials with viscoelastic stiffness greater than diamond [J].

Jaglinski, T. ;

Kochmann, D. ;

Stone, D. ;

Lakes, R. S. .

SCIENCE, 2007, 315 (5812) :620-622

[8]

Kashdan L., 2009, ACOUST SOC AM, V126, P2280

[9] Design, fabrication, and evaluation of negative stiffness elements using SLS [J].

Kashdan, Lia ;

Seepersad, Carolyn Conner ;

Haberman, Michael ;

Wilson, Preston S. .

RAPID PROTOTYPING JOURNAL, 2012, 18 (03) :194-200

[10]

Lakes R, 2009, VISCOELASTIC MATERIALS, P1, DOI 10.1017/CBO9780511626722

← 1 2 →