Residual Stress Analysis on Thin Metal Sheets Using the Incremental Hole Drilling Method - Fundamentals and Validation

被引：11

作者：

Magnier, A. ^{[1
]}

Zinn, W. ^{[1
]}

Niendorf, T. ^{[1
]}

Scholtes, B. ^{[1
]}

机构：

[1] Univ Kassel, Inst Mat Engn Metall Mat, Moenchebergstr 3, D-34125 Kassel, Germany

来源：

EXPERIMENTAL TECHNIQUES | 2019年 / 43卷 / 01期

关键词：

Hole drilling; Metal sheet; Thin; Brazing; Residual stress;

D O I：

10.1007/s40799-018-0266-x

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The aim of the present work is to broaden the scope of application of the hole drilling method and to enable reliable residual stress measurements on thin metal sheets. In this context the focus is on characterization of residual stresses on brazed sheet metal constructions. In this specific case coarse grains and low sheet thickness are strong restrictions for standard residual stress measurement methods. However, in the current work it is shown that it is possible to extend the scope of application of the incremental hole drilling method to thin components. For this purpose, calibration coefficient matrices for sheets having thicknesses of 0.7mm, 1mm and 1.6mm have been calculated using finite element analysis. Furthermore, by measuring residual stresses of bent metal sheets, the determined coefficients and measurement procedure feasibility have been validated. Finally, the application of the incremental hole drilling method on an austenitic-ferritic brazed sheet metal construction is demonstrated.

引用

页码：65 / 79

页数：15

共 50 条

[21] Effects of Numerical Methods on Residual Stress Evaluation by the Incremental Hole-Drilling Technique Using the Integral Method
Gore, B.
Nobre, J. P.
RESIDUAL STRESSES 2016: ICRS-10, 2017, 2 : 587 - 592
[22] Residual Stress Analysis on Thick Film Systems by the Incremental Hole-Drilling Method – Simulation and Experimental Results
E. Obelode
J. Gibmeier
Experimental Mechanics, 2013, 53 : 965 - 976
[23] Residual Stress Analysis on Thick Film Systems by the Incremental Hole-Drilling Method - Simulation and Experimental Results
Obelode, E.
Gibmeier, J.
EXPERIMENTAL MECHANICS, 2013, 53 (06) : 965 - 976
[24] Recent advances in the hole drilling method for residual stress measurement
Beghini, M
Bertini, L
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1998, 7 (02) : 163 - 172
[25] Recent advances in the hole drilling method for residual stress measurement
M. Beghini
L. Bertini
Journal of Materials Engineering and Performance, 1998, 7 : 163 - 172
[26] Improvements in residual stress measurement by the incremental centre hole drilling technique
Stefanescu, D.
Truman, C. E.
Smith, D. J.
Whitehead, P. S.
EXPERIMENTAL MECHANICS, 2006, 46 (04) : 417 - 427
[27] Improvements in Residual Stress Measurement by the Incremental Centre Hole Drilling Technique
D. Stefanescu
C. E. Truman
D. J. Smith
P. S. Whitehead
Experimental Mechanics, 2006, 46
[28] Residual Stress Analysis of Strongly Textured Materials by Means of the Incremental Hole-Drilling Method - Survey on the Application Limits
Schuster, Simone
Gibmeier, Jens
MATERIALS TESTING, 2014, 56 (11-12) : 915 - 922
[29] Residual Stress Measurement in Composite Laminates Using Incremental Hole-Drilling with Power Series
Smit, T. C.
Reid, R. G.
EXPERIMENTAL MECHANICS, 2018, 58 (08) : 1221 - 1235
[30] Residual Stress Measurement in Composite Laminates Using Incremental Hole-Drilling with Power Series
T. C. Smit
R. G. Reid
Experimental Mechanics, 2018, 58 : 1221 - 1235

← 1 2 3 4 5 →