Residual Stress Analysis on Thin Metal Sheets Using the Incremental Hole Drilling Method - Fundamentals and Validation

被引：11
|
作者：
Magnier, A. [1 ]
Zinn, W. [1 ]
Niendorf, T. [1 ]
Scholtes, B. [1 ]
机构：
[1] Univ Kassel, Inst Mat Engn Metall Mat, Moenchebergstr 3, D-34125 Kassel, Germany
来源：
EXPERIMENTAL TECHNIQUES | 2019年 / 43卷 / 01期
关键词：
Hole drilling; Metal sheet; Thin; Brazing; Residual stress;
D O I：
10.1007/s40799-018-0266-x
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The aim of the present work is to broaden the scope of application of the hole drilling method and to enable reliable residual stress measurements on thin metal sheets. In this context the focus is on characterization of residual stresses on brazed sheet metal constructions. In this specific case coarse grains and low sheet thickness are strong restrictions for standard residual stress measurement methods. However, in the current work it is shown that it is possible to extend the scope of application of the incremental hole drilling method to thin components. For this purpose, calibration coefficient matrices for sheets having thicknesses of 0.7mm, 1mm and 1.6mm have been calculated using finite element analysis. Furthermore, by measuring residual stresses of bent metal sheets, the determined coefficients and measurement procedure feasibility have been validated. Finally, the application of the incremental hole drilling method on an austenitic-ferritic brazed sheet metal construction is demonstrated.
引用
收藏
页码：65 / 79
页数：15
相关论文
共 50 条
  • [1] Residual Stress Analysis on Thin Metal Sheets Using the Incremental Hole Drilling Method – Fundamentals and Validation
    A. Magnier
    W. Zinn
    T. Niendorf
    B. Scholtes
    Experimental Techniques, 2019, 43 : 65 - 79
  • [2] Reliable Residual Stress Analysis for Thin Metal Sheets by Incremental Hole Drilling
    Simon, Nicola
    Mrotzek, Tobias
    Gibmeier, Jens
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2018, 7 (04) : 409 - 426
  • [3] Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method
    Wu, Tao
    Tinkloh, Steffen R.
    Troester, Thomas
    Zinn, Wolfgang
    Niendorf, Thomas
    JOURNAL OF COMPOSITES SCIENCE, 2020, 4 (03):
  • [4] Improvement and validation of residual stress measurement in composite laminates using the incremental hole-drilling method
    Liu, Xiaodong
    Wang, Xiaodong
    Guan, Zhidong
    Jiang, Ting
    Geng, Kunhao
    Li, Zengshan
    MECHANICS OF MATERIALS, 2021, 154
  • [5] Residual Stress Test and Simulation of Incremental Hole Drilling Method
    Wang, Min
    Liu, Yunan
    Zan, Tao
    Gao, Xiangsheng
    Zhang, Yanlin
    PROCEEDINGS OF 2016 7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING, (ICMAE), 2016, : 257 - 261
  • [6] Measuring the variation of residual stress with depth: A validation exercise for fine incremental hole drilling
    Fry, A. T.
    Lord, J. D.
    RESIDUAL STRESSES VII, 2006, 524-525 : 531 - 536
  • [7] Determination of residual stress in composite laminates using the incremental hole-drilling method
    Sicot, O
    Gong, XL
    Cherouat, A
    Lu, J
    JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (09) : 831 - 844
  • [8] Incremental Hole Drilling for Residual Stress Analysis of Thin Walled Components with Regard to Plasticity Effects
    Schuster, S.
    Steinzig, M.
    Gibmeier, J.
    EXPERIMENTAL MECHANICS, 2017, 57 (09) : 1457 - 1467
  • [9] Incremental Hole Drilling for Residual Stress Analysis of Thin Walled Components with Regard to Plasticity Effects
    S. Schuster
    M. Steinzig
    J. Gibmeier
    Experimental Mechanics, 2017, 57 : 1457 - 1467
  • [10] Near Edge Residual Stress Measurement Using Incremental Hole Drilling
    Olson, M. D.
    DeWald, A. T.
    Watanabe, B. T.
    EXPERIMENTAL MECHANICS, 2024, 64 (04) : 501 - 517
12345