Recrystallization of a supersaturated Al-Mn alloy

被引：32
|
作者：
Birol, Yucel [1 ]
机构：
[1] TUBITAK, Marmara Res Ctr, Mat Inst, Kocaeli, Turkey
来源：
SCRIPTA MATERIALIA | 2008年 / 59卷 / 06期
关键词：
thermomechanical processing; differential scanning calorimetry; aluminium alloys; recovery; recrystallization;
D O I：
10.1016/j.scriptamat.2008.05.016
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The response of thin Al-Mn strips to interannealing was investigated. The surface of the sheet samples cold rolled to epsilon < 0.9 is rearranged during annealing at 500 degrees C merely by grain growth. Sheet samples cold rolled to epsilon > 0.9 recrystallize fully at a lower annealing temperature of 450 degrees C. While recrystallization is accelerated with further increase in strain, recovery becomes the predominant mechanism through which the strain energy is released during annealing sheet samples starting at epsilon similar to 1.6. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：611 / 614
页数：4
相关论文
共 50 条
  • [41] Free surface effects on the recrystallization of compressed, stable, Al-Mn single crystals
    Miszczyk, Magdalena M.
    Paul, Henryk
    Driver, Julian H.
    MATERIALS CHARACTERIZATION, 2018, 146 : 135 - 148
  • [42] Effects of Si and Zr addition on strength and recrystallization behavior of Al-Mn alloy fin stocks for automotive heat exchanger
    Shimosaka, Daisuke
    Ueno, Mamoru
    17TH INTERNATIONAL CONFERENCE ON ALUMINIUM ALLOYS 2020 (ICAA17), 2020, 326
  • [43] STUDY OF PRECIPITATION AND RECRYSTALLIZATION IN AL-MN ALLOYS BY INTERNAL-FRICTION MEASUREMENTS
    DIALLO, C
    SCHALLER, R
    BENOIT, W
    MONDINO, M
    MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1982, 79 (01): : 33 - 39
  • [44] Influence of pre-recovery on the subsequent recrystallization and mechanical properties of a twin-roll cast Al-Mn alloy
    Huang, Li
    Huang, Guangjie
    Cao, Lingfei
    Wu, Xiaodong
    Jia, Zhihong
    Xia, Mingyong
    Liu, Qing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 63 - 72
  • [45] LOCAL-STRUCTURE AND CONCENTRATION IN AL-MN ALLOY ELECTRODEPOSITS
    TAKAYAMA, T
    SETO, H
    UCHIDA, J
    HINOTANI, S
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 1994, 24 (02) : 131 - 138
  • [46] STRUCTURE AND PROPERTIES OF A RAPIDLY QUENCHED COMMERCIAL AL-MN ALLOY
    RAO, MH
    SRIDHAR, G
    SURYANARAYANA, C
    ZEITSCHRIFT FUR METALLKUNDE, 1983, 74 (09): : 585 - 591
  • [47] Al-Mn alloy electroplated steel sheet for automotive material
    Hirayama, Katsuro
    Uchida, Jun-ichi
    Seto, Hirohisa
    Fukui, Kunihiro
    Miki, Keiji
    Sumitomo Metals, 1996, 48 (04): : 66 - 71
  • [48] Effect of homogenization treatment on microstructural evolution of Al-Mn alloy
    Pan, Yanfeng
    Huang, Ruiyin
    Guo, Fuan
    Ma, Ke
    Gu, Fengxian
    Liu, Guojin
    Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2012, 44 (01): : 124 - 128
  • [49] The softening of a dispersoid-rich commercial Al-Mn alloy
    Ekstrom, H. -E.
    Tangen, S.
    Mishin, O. V.
    Ostensson, L.
    FUNDAMENTALS OF DEFORMATION AND ANNEALING, 2007, 550 : 351 - +
  • [50] Impact of ECAP on wear performance of Al-Mn magnesium alloy
    Gopi, K. R.
    Nayaka, Shivananda H.
    MATERIALS RESEARCH EXPRESS, 2020, 7 (01)
12345