Temperature dependence of the flow stress of Fe-18Mn-0.6C-xA1 twinning-induced plasticity steel

被引:145
作者
Jung, Il-Chan [1 ]
De Cooman, Bruno C. [1 ]
机构
[1] Pohang Univ Sci & Technol, Grad Inst Ferrous Technol, Mat Design Lab, Pohang 790784, South Korea
基金
新加坡国家研究基金会;
关键词
Thermally activated dislocation glide; Solid solution hardening; Dynamic Hall-Petch effect; Dynamic strain aging; TWIP steel; STACKING-FAULT ENERGY; AL-C ALLOYS; FE-MN-C; TENSILE PROPERTIES; TWIP STEELS; DEFORMATION; BEHAVIOR; EVOLUTION; KINETICS; PHYSICS;
D O I
10.1016/j.actamat.2013.07.042
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The tensile properties of Fe-18Mn-0.6C with Al-alloying additions of 0, 1.5 and 2.5 wt.% were investigated in the temperature range from 213 K (-60 degrees C) to 413 K (140 degrees C). The addition of Al resulted in an increase of the yield strength due to solid solution hardening and a decrease of the work hardening due to the suppression of deformation twinning. Both the decrease of the deformation temperature and the addition of Al suppressed the dynamic strain aging, clearly indicating an interaction between the stacking fault region of the mobile dislocation and Mn C point defect complexes. A constitutive model for the temperature dependence of the flow stress, taking into account the thermally activated dislocation glide, Al solid solution hardening and the dynamic Hall-Petch effect caused by deformation twinning, was developed. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:6724 / 6735
页数:12
相关论文
共 40 条
[11]   Dependence of Deformation Twinning on Grain Orientation and Texture Evolution of High Manganese TWIP Steels at Different Deformation Temperatures [J].
Fang Xiu-hui ;
Yang Ping ;
Lu Fa-yun ;
Meng Li .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 (11) :46-52
[12]   SUBSTITUTIONAL SOLUTION HARDENING [J].
FLEISCHER, RL .
ACTA METALLURGICA, 1963, 11 (03) :203-&
[13]   A CONSTITUTIVE DESCRIPTION OF THE DEFORMATION OF COPPER BASED ON THE USE OF THE MECHANICAL THRESHOLD STRESS AS AN INTERNAL STATE VARIABLE [J].
FOLLANSBEE, PS ;
KOCKS, UF .
ACTA METALLURGICA, 1988, 36 (01) :81-93
[14]   On the physics of the Portevin-LeChatelier effect .2. From microscopic to macroscopic behaviour [J].
Hahner, P .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 207 (02) :216-223
[15]   On the physics of the Portevin-LeChatelier effect .1. The statistics of dynamic strain ageing [J].
Hahner, P .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 207 (02) :208-215
[16]   On the critical conditions of the Portevin Le Chatelier effect [J].
Hahner, P .
ACTA MATERIALIA, 1997, 45 (09) :3695-3707
[17]  
Jung I, METALL MA A IN PRESS
[18]   Influence of Al on internal friction spectrum of Fe-18Mn-0.6C twinning-induced plasticity steel [J].
Jung, Ilchan ;
Lee, Seok-Jae ;
De Cooman, Bruno C. .
SCRIPTA MATERIALIA, 2012, 66 (10) :729-732
[19]   Constitutive Modeling of the Tensile Behavior of Al-TWIP Steel [J].
Kim, Jinkyung ;
Estrin, Yuri ;
Beladi, Hossein ;
Timokhina, Ilana ;
Chin, Kwang-Geun ;
Kim, Sung-Kyu ;
De Cooman, Bruno C. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (02) :479-490
[20]   Effect of Al on the stacking fault energy of Fe-18Mn-0.6C twinning-induced plasticity [J].
Kim, Jinkyung ;
Lee, Seok-Jae ;
De Cooman, Bruno C. .
SCRIPTA MATERIALIA, 2011, 65 (04) :363-366