Effect of Heat Treatment on Microstructure of Continuous Unidirectional Solidified Cu-Ni-Sn Alloy

被引：1

作者：

Luo, Ji Hui ^{[1
]}

Li, Qin ^{[1
]}

Chen, Yan Hui ^{[1
]}

Liu, Shu ^{[1
]}

Wen, Qiu Yue ^{[1
]}

Ding, Hui Min ^{[1
]}

机构：

[1] Yangtze Normal Univ, Coll Mech & Elect Engn, Chongqing 408100, Peoples R China

来源：

MATERIALS PROCESSING FUNDAMENTALS 2019 | 2019年

关键词：

Cu-Ni-Sn alloy; Continuous unidirectional solidification; Microstructures; Annealing; DISCONTINUOUS PRECIPITATION; BEHAVIOR;

D O I：

10.1007/978-3-030-05728-2_15

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Cu-15%Ni-8%Sn alloy was prepared by continuous unidirectional solidification (CUS) processing and the as-cast CUS Cu-15%Ni-8%Sn alloywas homogenized. The evolution of microstructure and composition distribution of as-cast and annealed CUS Cu-15%Ni-8%Sn alloy was analyzed. The results show that the microstructure of as-cast CUS Cu-15%Ni-8%Sn is mainly composed of coarse columnar grains and there exist segregation phenomenon in the grain boundaries. After annealing at temperature of 850 degrees C for 30 min, it was found that the composition of the alloy began to become uniform and the solutes gathered at the grain boundaries diffused into the columnar grains.

引用

页码：163 / 168

页数：6

共 50 条

[21] Effect of Solution Treatment on the Rollability of a Cu-Ni-Mn-Sn Alloy [J].

Hadi, Morteza ;

Bayat, Omid ;

Karimi, Hadi ;

Sadeghi, Mohsen ;

Isfahani, Taghi .

IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2022, 19 (01) :1-11

[22] Comparison of Statistical and Soft Computing Models for Predicting Hardness and Wear Rate of Cu-Ni-Sn Alloy [J].

Ilangovan, S. ;

Vignesh, R. Vaira ;

Padmanaban, R. ;

Gokulachandran, J. .

PROGRESS IN COMPUTING, ANALYTICS AND NETWORKING, ICCAN 2017, 2018, 710 :559-571

[23] Microstructure evolution and mechanical property of directionally solidified Cu-9Ni-6Sn alloy wire during aging [J].

Wang, Meng ;

Yang, Qianru ;

Jiang, Yanbin ;

Qin, Liuxin ;

Tan, Fei ;

Xin, Zhao ;

Xiao, Zhu .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 :474-485

[24] Effect of Cr addition on the microstructure and properties of Cu-15Ni-8Sn alloy [J].

Yuan, Mingquan ;

Tang, Kun ;

Guo, Chengjun ;

Chen, Jinshui ;

Shi, Yufan ;

Yang, Bin .

MATERIALS TODAY COMMUNICATIONS, 2025, 44

[25] Research Progress on Cu-15Ni-8Sn Alloys: The Effect of Microalloying and Heat Treatment on Microstructure and Properties [J].

Yang, Shaodan ;

Song, Kexing ;

Zhou, Yanjun ;

Yang, Ran ;

Yu, Yan ;

Liu, Lele ;

Chen, Jidong ;

Zhou, Fei ;

Yang, Wenhao ;

Zhang, Guoshang ;

Du, Juan .

MATERIALS, 2023, 16 (17)

[26] The thermal instability mechanism and annealed behavior of ultra-high strength Cu-Ni-Sn alloy [J].

Jiang, Haowen ;

Yang, Zhen ;

Peng, Lijun ;

Guo, Hong ;

Xie, Haofeng ;

Liu, Dongmei ;

Cao, Yicheng .

JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1013

[27] Precipitation driven nano-twinning: Simultaneous enhancement of mechanical and electrical properties in Cu-Ni-Sn alloys [J].

Yang, Fei ;

Wu, Canhui ;

Li, Ruifeng ;

Xu, Yusong ;

Zhou, Lichu ;

Fang, Feng ;

Dong, Liming ;

Kim, Hyoung Seop ;

Huo, Wenyi ;

Yu, Tianbo .

SCRIPTA MATERIALIA, 2025, 267

[28] Microstructure evolution of directionally solidified Ni-43Ti-7Al alloy during heat treatment [J].

Zhou, Lei ;

Zheng, Lijing ;

Guo, Yihui ;

Zhang, Huarui ;

Zhang, Hu .

JOURNAL OF MATERIALS SCIENCE, 2013, 48 (05) :2176-2187

[29] Evaluation of strength and stress relaxation resistance of Cu-Ni-Sn alloys produced by a simple thermomechanical treatment [J].

Watanabe H. ;

Kita K. ;

Kunimine T. ;

Monzen R. ;

Muramatsu N. .

Zairyo/Journal of the Society of Materials Science, Japan, 2018, 67 (06) :619-625

[30] Differential effects of Fe, Ti and Fe plus Ti addition on the discontinuous precipitation and properties of cu-Ni-Sn alloys [J].

Ouyang, Huolong ;

Li, Yu ;

Guo, Chengjun ;

Yang, Ximing ;

Shi, Yufan ;

Xiao, Xiangpeng ;

Yang, Bin .

MATERIALS CHARACTERIZATION, 2024, 212

← 1 2 3 4 5 →