Dynamic and Capillary Shear Rheology of Natural Fiber-Reinforced Composites

被引:36
作者
Le Moigne, Nicolas [1 ,2 ]
van den Oever, Martien [2 ]
Budtova, Tatiana [1 ]
机构
[1] Mines ParisTech, CEMEF Ctr Mise Forme Mat, CNRS UMR 7635, F-06904 Sophia Antipolis, France
[2] Wageningen UR Food & Biobased Res, NL-6700 AA Wageningen, Netherlands
关键词
MECHANICAL-PROPERTIES; PROCESSING CONDITIONS; POLYMER MELTS; PART; POLYPROPYLENE; SUSPENSIONS; BEHAVIOR; FLOW; THERMOPLASTICS; MORPHOLOGY;
D O I
10.1002/pen.23521
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
An extended dynamic and capillary rheological study of molten flax and sisal polypropylene (PP) composites was performed. Fiber concentration varied from 20 to 50 wt% and shear rate from 0.1 rad s(-1) to 10,000 s(#142;-1). Maleic anhydride-grafted-PP was used as compatibilizer; it strongly reduces PP and composite viscosity. Composites are yield-stress shear-thinning fluids with solid-like behavior being more pronounced at high fiber content. Composites do not obey Cox-Merz rule, which was explained by different macrostructures of the molten composites in parallel plates and capillary die geometries: random fiber orientation versus strong alignment in the flow direction, respectively. Theories describing the viscosity of suspensions of solid particles were applied to the composites studied and rheological parameters and maximal packing fiber volume fraction were calculated. (c) 2013 Society of Plastics Engineers.
引用
收藏
页码:2582 / 2593
页数:12
相关论文
共 36 条
[1]   RHEOLOGY OF SHORT GLASS-FIBER REINFORCED POLYPROPYLENE [J].
AUSIAS, G ;
AGASSANT, JF ;
VINCENT, M ;
LAFLEUR, PG ;
LAVOIE, PA ;
CARREAU, PJ .
JOURNAL OF RHEOLOGY, 1992, 36 (04) :525-542
[2]   Processing of short-fiber reinforced polypropylene. I. Influence of processing conditions on the morphology of extruded filaments [J].
Barbosa, SE ;
Kenny, JM .
POLYMER ENGINEERING AND SCIENCE, 2000, 40 (01) :11-22
[3]   COMPARATIVE RHEOLOGICAL STUDIES ON JUTE-FIBER-FILLED AND GLASS-FIBER-FILLED POLYPROPYLENE COMPOSITE MELTS [J].
BASU, D ;
BANERJEE, AN ;
MISRA, A .
JOURNAL OF APPLIED POLYMER SCIENCE, 1992, 46 (11) :1999-2009
[4]   Rheological behavior of controlled-rheology polypropylenes obtained by peroxide-promoted degradation during extrusion: Comparison between homopolymer and copolymer [J].
Berzin, F ;
Vergnes, B ;
Delamare, L .
JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 80 (08) :1243-1252
[5]  
Bibbo M.A., 1985, J. Rheol, V29, P905
[6]   Composites reinforced with cellulose based fibres [J].
Bledzki, AK ;
Gassan, J .
PROGRESS IN POLYMER SCIENCE, 1999, 24 (02) :221-274
[7]   Mechanical properties of short-flax-fibre reinforced compounds [J].
Bos, Harriette L. ;
Muessig, Joerg ;
van den Oever, Martien J. A. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (10) :1591-1604
[8]  
Charrier J.-M., 1974, FIBRE SCI TECHNOL, V7, P161
[9]   RHEOLOGY OF SHORT GLASS FIBER-REINFORCED THERMOPLASTICS AND ITS APPLICATION TO INJECTION-MOLDING .1. FIBER MOTION AND VISCOSITY MEASUREMENT [J].
CROWSON, RJ ;
FOLKES, MJ ;
BRIGHT, PF .
POLYMER ENGINEERING AND SCIENCE, 1980, 20 (14) :925-933
[10]   RHEOLOGICAL PROPERTIES OF CORONA MODIFIED CELLULOSE POLYETHYLENE COMPOSITES [J].
DONG, S ;
SAPIEHA, S ;
SCHREIBER, HP .
POLYMER ENGINEERING AND SCIENCE, 1992, 32 (22) :1734-1739