Synthesis of fluorinated urethane acrylate based UV-curable coatings

被引：57

作者：

Canak, Tuba Cakir ^{[1
]}

Serhatli, I. Ersin ^{[1
]}

机构：

[1] Istanbul Tech Univ, Dept Chem, TR-34469 Istanbul, Turkey

来源：

PROGRESS IN ORGANIC COATINGS | 2013年 / 76卷 / 2-3期

关键词：

UV-curing; Urethane-acrylate; Fluorinated coatings; Contact angle; BLOCK-COPOLYMERS; SURFACE; POLYURETHANES; POLYMERS; GLYCOLS; RESINS;

D O I：

10.1016/j.porgcoat.2012.10.024

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

In the present work fluorinated urethane-acrylate (FUA) monomer was firstly prepared based on isophorone diisocyanate (IPDI), 3,5-bis(perfluorobenzyl)oxy benzyl alcohol (FOH) and 2-hydroxyethyl methacrylate (HEMA) via in situ method. The obtained novel fluorinated urethane-acrylate was characterized by H-1 NMR spectroscopy and Fourier Transform Infrared (FT-IR) spectroscopy. The UV-curable polyurethane-acrylate (UV-PUA) formulation was prepared with oligomers, polyurethane-acrylate (PUA) or epoxy acrylate (EA), monomers (FUA, HDDA and TPGDA) and photoinitiator, Darocur 1173. UV-curable clear coatings were applied on plexiglass and teflon substrates. The physical and mechanical properties of UV-cured coatings such as gel content, solvent resistance, hardness, gloss, flexibility and tensile tests were examined. Also thermal degradation behavior of coatings was also evaluated by thermogravimetric(TGA) analysis. Contact angle measurements of water and ethylene glycol on films of coatings have shown that the addition of fluorinated polyurethane-acrylate precursor to the system improved the water repellency and increased the contact angle from 72 degrees to 104 degrees. (c) 2012 Elsevier B.V. All rights reserved.

引用

页码：388 / 399

页数：12

共 36 条

[1]

Ameduri B., 2004, WELL ARCHITECTURED F, P512

[2] Poly(urethaneimides) (PUIs) containing tertiary amine groups as precursors for original PUI cationomers [J].

Awkal, Michel ;

Jonquieres, Anne ;

Clement, Robert ;

Lochon, Pierre .

EUROPEAN POLYMER JOURNAL, 2006, 42 (06) :1313-1324

[3]

Baum K., 1990, Patent No. [US4942164A, 4942164]

[4] Perfluoropolyether polymers by UV curing: design, synthesis and characterization [J].

Bongiovanni, Roberta ;

Medici, Andrea ;

Zompatori, Alberto ;

Garavaglia, Silvia ;

Tonelli, Claudio .

POLYMER INTERNATIONAL, 2012, 61 (01) :65-73

[5] New perfluoropolyether urethane methacrylates as surface modifiers: Effect of molecular weight and end group structure [J].

Bonglovanni, Roberta ;

Di Meo, Antonella ;

Pollicino, Antonino ;

Priola, Aldo ;

Tonelli, Claudio .

REACTIVE & FUNCTIONAL POLYMERS, 2008, 68 (01) :189-200

[6] NONDISPERSIVE INTERACTIONS AT LIQUID LIQUID AND LIQUID SOLID INTERFACES [J].

CARRE, A ;

MALCHERE, A .

JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1992, 149 (02) :379-391

[7] DETERMINATION OF LOW CRITICAL SURFACE TENSIONS OF NOVEL FLUORINATED POLY(AMIDE URETHANE) BLOCK COPOLYMERS .2. FLUORINATED SOFT-BLOCK BACKBONE AND SIDE-CHAINS [J].

CHAPMAN, TM ;

MARRA, KG .

MACROMOLECULES, 1995, 28 (06) :2081-2085

[8] Structural engineering of polyurethane coatings for high performance applications [J].

Chattopadhyay, D. K. ;

Raju, K. V. S. N. .

PROGRESS IN POLYMER SCIENCE, 2007, 32 (03) :352-418

[9] Effect of the NCO/OH ratio on the properties of Mesua Ferrea L. seed oil-modified polyurethane resins [J].

Dutta, S ;

Karak, N .

POLYMER INTERNATIONAL, 2006, 55 (01) :49-56

[10] A THEORY FOR THE ESTIMATION OF SURFACE AND INTERFACIAL ENERGIES .1. DERIVATION AND APPLICATION TO INTERFACIAL TENSION [J].

GIRIFALCO, LA ;

GOOD, RJ .

JOURNAL OF PHYSICAL CHEMISTRY, 1957, 61 (07) :904-909

← 1 2 3 4 →