Dry-Sliding Wear Response of MoTaWNbV High Entropy Alloy

被引：80

作者：

Poulia, Anthoula ^{[1
]}

Georgatis, Emmanuel ^{[1
]}

Lekatou, Angela ^{[1
]}

Karantzalis, Alexander ^{[1
]}

机构：

[1] Univ Ioannina, Dept Mat Sci & Engn, GR-45110 Ioannina, Greece

来源：

ADVANCED ENGINEERING MATERIALS | 2017年 / 19卷 / 02期

关键词：

MICROSTRUCTURE; BEHAVIOR; RESISTANCE; STABILITY; SYSTEM;

D O I：

10.1002/adem.201600535

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this work, the tribological performance of Mo20Ta20W20Nb20V20 Refractory High Entropy Alloy was examined. The alloy's wear response was tested under different experimental conditions. With the use of a metallic ball as a counter body partner, the morphology of the wear track and the presence of Fe oxides controlled the wear rate. When using a ceramic ball for the same sliding distances, similar observations were made regarding the width of the wear tracks and the reduction of the friction coefficient with an increase of the sliding distance. The examination of the debris further explained the wear mechanisms in every case. Finally, by comparing the wear response of Mo20Ta20W20Nb20V20 with that of a commercial super alloy, the improved behavior of the High Entropy Alloy was highlighted in all cases.

引用

页数：10

共 28 条

[1]

[Anonymous], 1982, Friction and wear: Calculation Methods

[2] Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718 [J].

Bhatt, Abhay ;

Attia, Helmi ;

Vargas, R. ;

Thomson, V. .

TRIBOLOGY INTERNATIONAL, 2010, 43 (5-6) :1113-1121

[3]

Birks N, 2006, INTRODUCTION TO THE HIGH-TEMPERATURE OXIDATION OF METALS, 2ND EDITION, P1, DOI 10.1017/CBO9781139163903

[4]

Buckley D. H., 1981, SURFACE EFFECTS ADHE

[5] Microstructure and properties of Al0.5CoCrCuFeNiTix (x=0-2.0) high-entropy alloys [J].

Chen, Min-Rui ;

Lin, Su-Jien ;

Yeh, Jien-Wei ;

Chen, Swe-Kai ;

Huang, Yuan-Sheng ;

Tu, Chin-Pang .

MATERIALS TRANSACTIONS, 2006, 47 (05) :1395-1401

[6] Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0.5CoCrCuFeNi high-entropy alloy [J].

Chen, Min-Rui ;

Lin, Su-Jien ;

Yeh, Jien-We | ;

Chen, Swe-Kai ;

Huang, Yuan-Sheng ;

Chuang, Ming-Hao .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (05) :1363-1369

[7] Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys [J].

Chuang, Ming-Hao ;

Tsai, Ming-Hung ;

Wang, Woei-Ren ;

Lin, Su-Jien ;

Yeh, Jien-Wei .

ACTA MATERIALIA, 2011, 59 (16) :6308-6317

[8] Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase [J].

Guo, Sheng ;

Liu, C. T. .

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2011, 21 (06) :433-446

[9] Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys [J].

Hsu, Chin-You ;

Sheu, Tsing-Shien ;

Yeh, Jien-Wei ;

Chen, Swe-Kai .

WEAR, 2010, 268 (5-6) :653-659

[10] Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition [J].

Hsu, CY ;

Yeh, JW ;

Chen, SK ;

Shun, TT .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (05) :1465-1469

← 1 2 3 →