Influence of forging and cooling rate on microstructure and properties of medium carbon microalloy forging steel

被引：31

作者：

Gündüz, S ^{[1
]}

Çapar, A ^{[1
]}

机构：

[1] Zonguldak Karaelmas Univ, Karabuk Tech Educ Fac, TR-78200 Karabuk, Turkey

来源：

JOURNAL OF MATERIALS SCIENCE | 2006年 / 41卷 / 02期

关键词：

Polymer; Microstructure; Medium Carbon; Medium Carbon Microalloy; Carbon Microalloy;

D O I：

10.1007/s10853-005-4239-y

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Effect of cooling rates on the microstructure and properties of MA steel processed through forging route was investigated. The steels used were medium carbon microalloyed steel with varying vanadium and aluminum percentages. Specimens were heated at 1100 °C for 30 minutes and forging was carried out. The room temperature tensile strength was measured using an Instron machine at a crosshead speed of 1mm/minute. The pearlite grain size, volume fraction of ferrite, and pearlite were determined by using mean linear intercept method and point counting. Results show that vanadium addition raised strength and hardness by precipitation strengthening and by refining the pearlite.

引用

页码：561 / 564

页数：4

共 10 条

[1] ASKELAND DR, 1996, SCI ENG MAT, P329
[2] BURNETT ME, 1997, FUNDAMENTALS APPL MI
[3] Gladman T., 1997, The Physical Metallurgy of Microalloyed Steels, V1st edn, P341
[4] The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels
Jahazi, M
Eghbali, B
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) : 594 - 598
[5] LANGNBORN R, 1984, HSLA STEELS PROCESSI
[6] Acicular ferrite formation in a medium carbon steel with a two stage continuous cooling
Madariaga, I
Gutiérrez, I
García-de Andres, C
Capdevila, C
[J]. SCRIPTA MATERIALIA, 1999, 41 (03) : 229 - 235
[7] Microstructures and properties of direct-cooled microalloy forging steels
Matlock, DK
Krauss, G
Speer, JG
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) : 324 - 328
[8] REEDER A, 1987, FUNDAMENTALS MICROAL
[9] Sage A.M., 1992, HSLA Steels Processing, Properties and aplications, ed
[10] The behaviour of structural steels at elevated temperatures and the design of fire resistant steels
Sha, W
Kirby, BR
Kelly, FS
[J]. MATERIALS TRANSACTIONS, 2001, 42 (09) : 1913 - 1927

← 1 →