Investigation of the effect of cutting speed on surface quality in abrasive water jet cutting of 316L stainless steel

被引：29

作者：

Loschner, Piotr ^{[1
]}

Jarosz, Krzysztof ^{[1
]}

Nieslony, Piotr ^{[1
]}

机构：

[1] Opole Univ Technol, Proszkowska Str 78, PL-45758 Opole, Poland

来源：

INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016 | 2016年 / 149卷

关键词：

stainless steel; abrasive water jet; cutting; machining marks; surface roughness; ROUGHNESS; TEXTURE;

D O I：

10.1016/j.proeng.2016.06.667

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study presents the effect of cutting speed on surface roughness in abrasive water jet cutting of 10mm thick stainless steel samples. Photographs of cut surfaces were taken and roughness parameters were measured in different locations across depth of cut. Differences between obtained surface geometric structures and measured roughness parameter values were presented and discussed. The research has shown a considerable effect of cutting speed on surface roughness, surface quality and presence of machining marks. This effect was especially noticeable in lower parts of examined cut surfaces. (C) 2016 The Authors. Published by Elsevier Ltd.

引用

页码：276 / 282

页数：7

共 18 条

[1] Effect of feed rate on surface roughness in abrasive waterjet cutting applications [J].

Akkurt, A ;

Kulekci, MK ;

Seker, U ;

Ercan, F .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (03) :389-396

[2] Abrasive waterjet cutting of polycrystalline diamond: A preliminary investigation [J].

Axinte, D. A. ;

Srinivasu, D. S. ;

Kong, M. C. ;

Butler-Smith, P. W. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (10) :797-803

[3] Experimental Study on Surface Roughness in Abrasive Water Jet Cutting [J].

Begic-Hajdarevic, Derzija ;

Cekic, Ahmet ;

Mehmedovic, Muhamed ;

Djelmic, Almina .

25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 :394-399

[4] Tangential turning of Incoloy alloy 925 using abrasive water jet technology [J].

Carach, Jan ;

Hloch, Sergej ;

Hlavaek, Petr ;

Scucka, Jiri ;

Martinec, Petr ;

Petru, Jana ;

Zlamal, Tomas ;

Zelenak, Michal ;

Monka, Peter ;

Lehocka, Dominika ;

Krolczyk, Jolanta .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12) :1747-1752

[5] Surface roughness prediction by extreme learning machine constructed with abrasive water jet [J].

Cojbasic, Zarko ;

Petkovic, Dalibor ;

Shamshirband, Shahaboddin ;

Tong, Chong Wen ;

Ch, Sudheer ;

Jankovic, Predrag ;

Ducic, Nedeljko ;

Baralic, Jelena .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 43 :86-92

[6] Roughness parameters [J].

Gadelmawla, ES ;

Koura, MM ;

Maksoud, TMA ;

Elewa, IM ;

Soliman, HH .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 123 (01) :133-145

[7]

Holmqvist G, 2008, P 19 INT C WAT JETT, P273

[8]

Hreha P, 2014, METALURGIJA, V53, P533

[9] ROUGHNESS PARAMETERS CALCULATION BY MEANS OF ON-LINE VIBRATION MONITORING EMERGING FROM AWJ INTERACTION WITH MATERIAL [J].

Hreha, Pavol ;

Radvanska, Agata ;

Knapcikova, Lucia ;

Krolczyk, Grzegorz M. ;

Legutko, Stanislaw ;

Krolczyk, Jolanta B. ;

Hloch, Sergej ;

Monka, Peter .

METROLOGY AND MEASUREMENT SYSTEMS, 2015, 22 (02) :315-326

[10] Determination of vibration frequency depending on abrasive mass flow rate during abrasive water jet cutting [J].

Hreha, Pavol ;

Radvanska, Agata ;

Hloch, Sergej ;

Perzel, Vincent ;

Krolczyk, Grzegorz ;

Monkova, Katarina .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (1-4) :763-774

← 1 2 →