Construction and power test of the extraction kicker magnet for spallation neutron source accumulator ring

被引：0

作者：

Pai, C ^{[1
]}

Hahn, H ^{[1
]}

Hseuh, H ^{[1
]}

Lee, Y ^{[1
]}

Meng, W ^{[1
]}

Mi, J ^{[1
]}

Sandberg, J ^{[1
]}

Todd, R ^{[1
]}

Raparia, D ^{[1
]}

Tsoupas, N ^{[1
]}

Tuozzolo, J ^{[1
]}

Warburton, D ^{[1
]}

Wei, J ^{[1
]}

Weiss, D ^{[1
]}

Zhang, W ^{[1
]}

机构：

[1] Brookhaven Natl Lab, Collider Accelerator Dept, Upton, NY 11973 USA

来源：

2005 IEEE PARTICLE ACCELERATOR CONFERENCE (PAC), VOLS 1-4 | 2005年

关键词：

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

Two extraction kicker magnet assemblies that contain seven individual pulsed magnet modules each will kick the proton beam vertically out of the SNS accumulator ring into the aperture of the extraction Lambertson septum magnet. The proton beam then travels to the 1.4 MW SNS target assembly. The 14 kicker magnets and major components of the kicker assembly have been fabricated by BNL. The inner surfaces of the kicker magnets were coated with TiN to reduce the secondary electron yield. All 14 power supplies have been built, tested and delivered to ORNL. Before final installation, a partial assembly of the kicker system with three kicker magnets was assembled to test the functions of each critical component in the system. In this paper we report the progress of the construction of the kicker components, the TiN coating of the magnets, the installation procedure of the magnets and the full power test of a kicker magnet with the power supply.

引用

页码：1183 / 1185

页数：3

共 50 条

[41] The commissioning plan for the spallation neutron source ring and transport lines
Henderson, S
Assadi, S
Cousineau, S
Dodson, G
Danilov, V
Galambos, J
Holmes, J
Reece, K
Shea, T
Raparia, D
Blaskiewicz, M
Lee, YY
Papaphilippou, Y
PROCEEDINGS OF THE 2003 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 2003, : 1569 - 1571
[42] POWER DENSITIES IN MATERIALS IN SPALLATION NEUTRON SOURCE ENVIRONMENTS
KIMURA, M
CARPENTER, JM
MILDNER, DFR
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH, 1982, 198 (2-3): : 433 - 445
[43] Design and construction of a new type kicker magnet for injection of BEPC II storage ring
Wen, K
Hao, YD
Han, Q
Chen, JH
HIGH ENERGY PHYSICS AND NUCLEAR PHYSICS-CHINESE EDITION, 2005, 29 (06): : 611 - 614
[44] Chinese Spallation Neutron Source starts construction in Dongguan City
Bulletin of the Chinese Academy of Sciences, 2011, (04) : 253 - 253
[45] Design and commissioning of the Beam Test Facility at the Spallation Neutron Source
Zhang, Z.
Cousineau, S.
Aleksandrov, A.
Menshov, A.
Zhukov, A.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2020, 949
[46] Conceptual Design of the Moderator Test Station at the Spallation Neutron Source
Iverson, E. B.
Johns, K. C.
Gallmeier, F. X.
Grammer, K. B.
10TH INTERNATIONAL MEETING OF UNION FOR COMPACT ACCELERATOR-DRIVEN NEUTRON SOURCES, UCANS-10, 2024, 298
[47] Design of current septum magnet for injection system of China Spallation Neutron Source
Chen, Yuan
Kang, Wen
Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams, 2012, 24 (02): : 453 - 456
[48] Electron cloud development in the Proton Storage Ring and in the Spallation Neutron Source
Pivi, MTF
Furman, MA
PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS, 2003, 6 (03):
[49] AN FFAG COMPRESSOR AND ACCELERATOR RING STUDIED FOR THE GERMAN SPALLATION NEUTRON SOURCE
MEADS, PF
WUSTEFELD, G
IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1985, 32 (05) : 2697 - 2699
[50] Electron cloud instabilities in the proton storage ring and spallation neutron source
Blaskiewicz, M
Furman, MA
Pivi, M
Macek, RJ
PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS, 2003, 6 (01):

← 1 2 3 4 5 →