Construction and power test of the extraction kicker magnet for spallation neutron source accumulator ring

被引：0

作者：

Pai, C ^{[1
]}

Hahn, H ^{[1
]}

Hseuh, H ^{[1
]}

Lee, Y ^{[1
]}

Meng, W ^{[1
]}

Mi, J ^{[1
]}

Sandberg, J ^{[1
]}

Todd, R ^{[1
]}

Raparia, D ^{[1
]}

Tsoupas, N ^{[1
]}

Tuozzolo, J ^{[1
]}

Warburton, D ^{[1
]}

Wei, J ^{[1
]}

Weiss, D ^{[1
]}

Zhang, W ^{[1
]}

机构：

[1] Brookhaven Natl Lab, Collider Accelerator Dept, Upton, NY 11973 USA

来源：

2005 IEEE PARTICLE ACCELERATOR CONFERENCE (PAC), VOLS 1-4 | 2005年

关键词：

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

Two extraction kicker magnet assemblies that contain seven individual pulsed magnet modules each will kick the proton beam vertically out of the SNS accumulator ring into the aperture of the extraction Lambertson septum magnet. The proton beam then travels to the 1.4 MW SNS target assembly. The 14 kicker magnets and major components of the kicker assembly have been fabricated by BNL. The inner surfaces of the kicker magnets were coated with TiN to reduce the secondary electron yield. All 14 power supplies have been built, tested and delivered to ORNL. Before final installation, a partial assembly of the kicker system with three kicker magnets was assembled to test the functions of each critical component in the system. In this paper we report the progress of the construction of the kicker components, the TiN coating of the magnets, the installation procedure of the magnets and the full power test of a kicker magnet with the power supply.

引用

页码：1183 / 1185

页数：3

共 50 条

[1] Performance improvement of an extraction Lambertson septum magnet in the Spallation Neutron Source accumulator ring
Wang, J. G.
PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS, 2009, 12 (04):
[2] Accumulator Ring lattice for the source National Spallation Neutron Source
Gardner, CJ
Lee, YY
Luccio, AU
PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 962 - 964
[3] The spallation neutron source accumulator ring RF system
Hardek, T.
Piller, M.
Champion, M.
Crofford, M.
Ma, H.
Zaltsman, A.
Smith, K.
2007 IEEE PARTICLE ACCELERATOR CONFERENCE, VOLS 1-11, 2007, : 7 - +
[4] Magnets for the National Spallation Neutron Source Accumulator Ring
Brookhaven Natl Lab, Upton, United States
Proc IEEE Part Accel Conf, (3233-3235):
[5] Magnets for the national spallation neutron source accumulator ring
Tuozzolo, J
Brodowski, J
Danby, G
Jackson, J
Meng, W
PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 3233 - 3235
[6] Impedance measurements of the Spallation Neutron Source extraction kicker system
Hahn, H.
PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS, 2004, 7 (10): : 54 - 70
[7] Digital rf control for Spallation Neutron Source accumulator ring
Ma, Hengjie
Kasemir, K.
Champion, M.
Crofford, M.
Hardek, T.
Piller, M.
Zhang, Y.
2007 IEEE PARTICLE ACCELERATOR CONFERENCE, VOLS 1-11, 2007, : 1181 - 1183
[8] Development of the repetitive pulsed power system for spallation neutron source beam extraction fast kicker
Zhang, W
Sandberg, J
Cutler, R
Hahn, H
Lambiase, R
Lee, YY
Mi, J
Nehring, T
Pai, C
Rust, K
Tsoupas, N
Tuozzolo, J
Warburton, D
Wei, H
Zhang, SY
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2004, 32 (05) : 1945 - 1952
[9] Mechanism of electron cloud clearing in the accumulator ring of the Spallation Neutron Source
Wang, LF
Raparia, D
Wei, J
Zhang, SY
PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS, 2004, 7 (03): : 38 - 49
[10] Experimental characterization of the spallation neutron source accumulator ring collimation system
SNS, ORNL, Oak Ridge, TN 37830, United States
Proceedings of the IEEE Particle Accelerator Conference, 2007, : 703 - 705

← 1 2 3 4 5 →