Suction characteristics of compacted zeolite-bentonite and sand-bentonite mixtures

Soil suction is one of the most important parameters describing soil moisture conditions for unsaturated soils used in landfill liners. However, few studies have been conducted on the suction characteristics of compacted zeolite-bentonite mixtures (ZBMs) and sand-bentonite mixtures (SBMs), which are proposed for use as liner materials. Nevertheless, zeolite is known for its microporous skeleton containing cages and tunnels and it has a great physical affiliation to water uptake. Zeolite and bentonite, in a mixture, are thought to be in competition for water uptake and this may alter the distribution of water content for each soil in the mixture. The present study investigated the suction properties of compacted ZBMs and SBMs for varying mixing ratios and compaction water contents. The soil suction measurement technique chosen was the filter-paper method. The suction characteristics of powdered, granular, and block zeolites, as well as 0, 10, and 20% bentonite in ZBMs and SBMs were measured and compared with each other. Contaminated compacted ZBMs are compared with those of uncontaminated compacted ones at the optimum water content for the 10% and 20% mixtures. The results show that suction capacity of zeolite increases with grain size. As bentonite content increases, both matric and total suction increase for both mixtures. ZBMs have higher matric suction values than SBMs, but not total suction values. Contaminated total suction values are found to be higher than those of uncontaminated samples due to an increase in dissolved ion concentration.