Impact Tests on Lincoln Wool Fibers Using a Mini Split Hopkinson Tensile Bar

被引：2

作者：

Ruan, Dong ^{[1
]}

Leung, Ming Yan ^{[2
]}

Lu, Guoxing ^{[1
,3
]}

Yu, Tongxi ^{[2
]}

Cao, Jinan

Blicbau, Aaron Simon ^{[1
]}

机构：

[1] Swinburne Univ Technol, Fac Engn & Ind Sci, Hawthorn, Vic 3122, Australia

[2] Hong Kong Univ Sci & Technol, Dept Mech Engn, Kowloon, Hong Kong, Peoples R China

[3] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore

来源：

TEXTILE RESEARCH JOURNAL | 2009年 / 79卷 / 05期

关键词：

impact loading; Lincoln wool fiber; mini split Hopkinson tensile bar; stress-strain curve; MECHANICAL-PROPERTIES; KERATIN FIBERS; STRAIN-RATE; DIAMETER; CURVE; MODEL;

D O I：

10.1177/0040517508095610

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

A new testing method using a mini split Hopkinson tensile bar was employed in the impact tests of Lincoln wool fibers. Stress-strain curves of Lincoln wool fibers subjected to impact loadings at strain rates in the order of 10(2) s(-1) were obtained, which fill the gap in the impact data for Lincoln wool fibers. For comparison, quasi-static tests were also carried out with a single Lincoln wool fiber using a Micro-Tester. Stress level was observed to increase with increasing strain rates.

引用

页码：444 / 452

页数：9

共 50 条

[1] On the Accurate Strain Measurement in Split Hopkinson Tensile Bar Tests
Chen, Cheng
Qian, Xudong
PROCEEDINGS OF THE 17TH EAST ASIAN-PACIFIC CONFERENCE ON STRUCTURAL ENGINEERING AND CONSTRUCTION, EASEC-17 2022, 2023, 302 : 215 - 222
[2] Dynamic compressive and splitting tensile tests on mortar using split Hopkinson pressure bar technique
Yang, Fei
Ma, Hongwei
Jing, Lin
Zhao, Longmao
Wang, Zhihua
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2015, 12 (04): : 730 - 746
[3] Influence of Specimen Geometry on Split Hopkinson Tensile Bar Tests on Sheet Materials
P. Verleysen
J. Degrieck
T. Verstraete
J. Van Slycken
Experimental Mechanics, 2008, 48
[4] Influence of specimen geometry on split Hopkinson tensile bar tests on sheet materials
Verleysen, P.
Degrieck, J.
Verstraete, T.
Van Slycken, J.
EXPERIMENTAL MECHANICS, 2008, 48 (05) : 587 - 598
[5] A new split Hopkinson tensile bar design
Gerlach, Robert
Kettenbeil, Christian
Petrinic, Nik
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2012, 50 : 63 - 67
[6] Intelligent optimization design of specimen on sheet materials for Split Hopkinson Tensile Bar tests
Wang, Qinghua
Xu, Feng
Xing, Liangliang
Huang, Dedong
Wu, Bin
2019 INTERNATIONAL CONFERENCE ON ADVANCED ELECTRONIC MATERIALS, COMPUTERS AND MATERIALS ENGINEERING (AEMCME 2019), 2019, 563
[7] Improved specimen recovery in tensile split Hopkinson bar
Isakov, Matti
Hiermaier, Stefan
Kuokkala, Veli-Tapani
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2014, 372 (2023):
[8] Yielding phenomena appeared in impact tensile test using a split-hopkinson pressure bar method
Grad. School of Eng., Kyoto Univ., Sakyo-ku, Kyoto, 606-8501
Zairyo, 2006, 9 (819-823):
[9] On spurious reflection waves in Hopkinson bar tensile tests using a collar
Nguyen, CH
Schindler, HJ
JOURNAL DE PHYSIQUE IV, 1997, 7 (C3): : 85 - 90
[10] Strain rate jump tests on an austenitic stainless steel with a modified tensile Hopkinson split bar
Fernandez, Naiara I. Vazquez
Isakov, Matti
Hokka, Mikko
Kuokkala, Veli-Tapani
12TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING (DYMAT 2018), 2018, 183

← 1 2 3 4 5 →