Influence of starting temperature on differential scanning calorimetry measurements of an Al-Mg-Si alloy

被引：9
|
作者：
Pogatscher, S. [1 ]
Antrekowitsch, H. [2 ]
Uggowitzer, P. J. [1 ]
机构：
[1] Swiss Fed Inst Technol, Lab Met Phys & Technol, Dept Mat, CH-8093 Zurich, Switzerland
[2] Univ Leoben, Inst Nonferrous Met, A-8700 Leoben, Austria
来源：
MATERIALS LETTERS | 2013年 / 100卷
关键词：
Aluminum alloys; Aging; Precipitation; Phase transformation kinetics; Differential scanning calorimetry; PRECIPITATION; KINETICS; SEQUENCE;
D O I：
10.1016/j.matlet.2013.03.003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study investigates the effect of starting temperature on differential scanning calorimetry measurements of an Al-Mg-Si alloy. Linear heating experiments starting from 294 K to 423 K were performed at different heating rates directly after quenching. It is shown that the peak for the major strengthening phase beta '' is shifted to unexpected high values at low heating rates for a starting temperature of 294 K. The effect is supposed to be comparable to the well-known influence of room temperature storage after quenching on the precipitation of beta ''. As a consequence it is shown that methods to determine effective activation energies based on Kissinger-like analysis are restricted to measurement conditions where transformation mechanisms are not changed by the heating rate in Al-Mg-Si alloys. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：163 / 165
页数：3
相关论文
共 50 条
  • [1] Low-Temperature Differential Scanning Calorimetry of an Al-Mg-Si Alloy
    Chang, C. S. T.
    Banhart, J.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (07): : 1960 - 1964
  • [2] Low-Temperature Differential Scanning Calorimetry of an Al-Mg-Si Alloy
    C. S. T. Chang
    J. Banhart
    Metallurgical and Materials Transactions A, 2011, 42 : 1960 - 1964
  • [3] Process-controlled suppression of natural aging in an Al-Mg-Si alloy
    Pogatscher, S.
    Kozeschnik, E.
    Antrekowitsch, H.
    Werinos, M.
    Gerstl, S. S. A.
    Loeffler, J. F.
    Uggowitzer, P. J.
    SCRIPTA MATERIALIA, 2014, 89 : 53 - 56
  • [4] Modelling of differential scanning calorimetry heating curves for precipitation and dissolution in an Al-Mg-Si
    Afshar, Mehran
    Mao, Fengxin
    Jiang, Haichun
    Mohles, Volker
    Schick, Michael
    Hack, Klaus
    Korte-Kerzel, Sandra
    Barrales-Mora, Luis A.
    COMPUTATIONAL MATERIALS SCIENCE, 2019, 158 : 235 - 242
  • [5] Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy
    Pogatscher, S.
    Antrekowitsch, H.
    Leitner, H.
    Sologubenko, A. S.
    Uggowitzer, P. J.
    SCRIPTA MATERIALIA, 2013, 68 (02) : 158 - 161
  • [6] Ultrafast artificial aging of Al-Mg-Si alloys
    Werinos, M.
    Antrekowitsch, H.
    Kozeschnik, E.
    Ebner, T.
    Moszner, F.
    Loeffler, J. F.
    Uggowitzer, P. J.
    Pogatscher, S.
    SCRIPTA MATERIALIA, 2016, 112 : 148 - 151
  • [7] Influence of interrupted quenching on artificial aging of Al-Mg-Si alloys
    Pogatscher, S.
    Antrekowitsch, H.
    Leitner, H.
    Poeschmann, D.
    Zhang, Z. L.
    Uggowitzer, P. J.
    ACTA MATERIALIA, 2012, 60 (11) : 4496 - 4505
  • [8] PRECIPITATION SEQUENCE OF AN AGED Al-Mg-Si ALLOY
    Fang, X.
    Song, M.
    Li, K.
    Du, Y.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2010, 46 (02) : 171 - 180
  • [9] Over-ageing of an Al-Mg-Si alloy with silicon excess
    Meyruey, G.
    Massardier, V
    Lefebvre, W.
    Perez, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 730 : 92 - 105
  • [10] The effect of Zn on the age hardening response in an Al-Mg-Si alloy
    Ding, X. P.
    Cui, H.
    Zhang, J. X.
    Li, H. X.
    Guo, M. X.
    Lin, Z.
    Zhuang, L. Z.
    Zhang, J. S.
    MATERIALS & DESIGN, 2015, 65 : 1229 - 1235
12345