Abnormal growth relationship between Si and other phases in undercooled Al-Cu-Si alloy

被引:6
|
作者
Ruan, Y. [1 ]
Lu, X. Y. [1 ]
机构
[1] Northwestern Polytech Univ, Dept Appl Phys, Xian 710072, Peoples R China
基金
中国国家自然科学基金;
关键词
Rapid solidification; Metals and alloys; Microstructure; Phase transitions; LIQUID SURFACE ENERGIES; MECHANICAL-PROPERTIES; EUTECTIC ALLOY; SOLIDIFICATION; MICROSTRUCTURE; SEGREGATION; NUCLEATION; SYSTEMS; TI;
D O I
10.1016/j.jallcom.2012.07.068
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The dependence of the growth relationship between Si and other two phases on undercooling was investigated in terms of microstructural characteristics in Al77.2Cu13.6Si9.2 ternary alloy. As undercooling increases, the independent growth of faceted Si phase and the cooperative growth of Al and theta phases are replaced by the attaching growth of Al phase on faceted Si phase in the ternary eutectic. At the same time, theta phase and a small amount of non-faceted Si phase tend to grow cooperatively in both pseudobinary and ternary eutectics. Once undercooling exceeds a critical value, the independent nucleation and growth of the three non-faceted phases result in anomalous ternary eutectic. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:232 / 235
页数:4
相关论文
共 50 条
  • [1] Growth direction and Si alloying affecting directionally solidified structures of Al-Cu-Si alloys
    Costa, T. A.
    Moreira, A. L.
    Moutinho, D. J.
    Dias, M.
    Ferreira, I. L.
    Spinelli, J. E.
    Rocha, O. L.
    Garcia, A.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (09) : 1103 - 1112
  • [2] Rapid solidification of undercooled Al-Cu-Si eutectic alloys
    RUAN Ying & WEI BingBo Department of Applied Physics
    Science Bulletin, 2009, (01) : 53 - 58
  • [3] Rapid solidification of undercooled Al-Cu-Si eutectic alloys
    Ruan Ying
    Wei BingBo
    CHINESE SCIENCE BULLETIN, 2009, 54 (01): : 53 - 58
  • [4] Dendritic Si growth morphologies in highly undercooled Al-Si alloys
    Liu, Dongmei
    Fang, Yindong
    Nolte, Stefan
    Lippmann, Stephanie
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 31 : 520 - 528
  • [5] Microstructural Development in a Ternary Al-Cu-Si Alloy during Transient Solidification
    Ferreira, I. L.
    Moutinho, D. J.
    Gomes, L. G.
    Rocha, O. L.
    Goulart, P. R.
    Garcia, A.
    ADVANCED MATERIALS FORUM V, PT 1 AND 2, 2010, 636-637 : 643 - +
  • [6] Understanding the relationship between microstructure and mechanical properties of Al-Cu-Si ultrafine eutectic composites
    Kim, Jeong Tae
    Lee, Seoung Wan
    Hong, Sung Hwan
    Park, Hae Jin
    Park, Jun-Young
    Lee, Naesung
    Seo, Yongho
    Wang, Wei-Min
    Park, Jin Man
    Kim, Ki Buem
    MATERIALS & DESIGN, 2016, 92 : 1038 - 1045
  • [7] Analysis of the Microstructure, Properties and Machinability of Al-Cu-Si Alloys
    Kozana, J.
    Piekos, M.
    Maj, M.
    Garbacz-Klempka, A.
    Zak, P. L.
    ARCHIVES OF FOUNDRY ENGINEERING, 2020, 20 (04) : 145 - 153
  • [8] Thermomechanical behavior of Al-Cu-Si commercial alloy modified with rare earths
    Camarillo-Cisneros, J.
    Perez-Bustamante, R.
    Martinez-Sanchez, R.
    REVISTA MEXICANA DE FISICA, 2020, 66 (06) : 782 - 789
  • [9] Numerical and experimental investigation of microporosity formation in a ternary Al-Cu-Si alloy
    Ferreira, Ivaldo L.
    Lins, Jefferson F. C.
    Moutinho, Daniel J.
    Gomes, Laercio G.
    Garcia, Amauri
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 503 (01) : 31 - 39
  • [10] Microstructure and Tensile Properties of Al-Cu-Si Alloy with Different Solidification Pressures
    Ouyang, X. X.
    Zhao, H. D.
    Zhang, K. W.
    Li, Y. Y.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL II: MODERN DESIGN THEORY AND METHODOLOGY, MEMS AND NANOTECHNOLOGY, AND MATERIAL SCIENCE AND TECHNOLOGY IN MANUFACTURING, 2009, 628-629 : 593 - 598