Wear Behaviour of Nanostructured Polymer-Based Safety Films on Soda-Lime Glass

被引：3

作者：

Panagopoulos, C. N. ^{[1
]}

Georgiou, E. P. ^{[2
,3
]}

Tradas, G. S. ^{[1
]}

Gianakopoulos, K. I. ^{[1
]}

机构：

[1] Natl Tech Univ Athens, Met Phys Lab, Athens 15780, Greece

[2] Katholieke Univ Leuven KU Leuven, Dept Mat Engn MTM, Kasteelpk Arenberg 44, B-3001 Leuven, Belgium

[3] Falex Tribol NV, Wingepk 23B, B-3110 Rotselaar, Belgium

来源：

COATINGS | 2016年 / 6卷 / 03期

关键词：

glass; multilayered polymeric coatings; safety films; wear; adhesion; ABRASIVE WEAR; BOROSILICATE GLASS; COATINGS; FRICTION; STEEL; COMPOSITES; EROSION;

D O I：

10.3390/coatings6030026

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The wear behaviour of bare and polymer-coated soda-lime glass specimens sliding against 440C stainless steel counterfaces was investigated with the aid of a pin-on-disk apparatus. The selected polymeric coatings were commercially supplied safety films, which are nowadays extensively applied on glass in the automotive and construction industry. One of their main failures is the degradation of their properties due to wear. In this work, the frictional behaviour of these coatings on glass were evaluated and compared to those of bare soda-lime glass. Correlations have been also made between the worn surfaces and weight loss in order to investigate the effect of wear conditions (speed, load) on the wear behaviour of these tribosystems. In addition, during the dry wear of soda-lime glass sliding against stainless steel counterfaces, the dominant wear mechanisms were found to be localized adhesion and abrasion, whereas, in the case of the multilayered polymeric coatings localized adhesion, deformation and tearing were observed.

引用

页数：10

共 26 条

[1] Effect of annealing and chemical strengthening on soda lime glass erosion wear by sand blasting [J].

Bousbaa, C ;

Madjoubi, A ;

Hamidouche, M ;

Bouaouadja, N .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (02) :331-343

[2] PLASTIC-FLOW OF ISOTROPIC POLYMERS [J].

BOWDEN, PB ;

JUKES, JA .

JOURNAL OF MATERIALS SCIENCE, 1972, 7 (01) :52-&

[3] Friction and rolling-sliding wear of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel [J].

Corengia, P ;

Walther, F ;

Ybarra, G ;

Sommadossi, S ;

Corbari, R ;

Broitman, E .

WEAR, 2006, 260 (4-5) :479-485

[4]

Cullity B.D., 1959, ELEMENTS XRAY DIFFRA, P259

[5] Structural application of GRC in telecommunication towers [J].

Ferreira, J. G. ;

Branco, F. A. .

CONSTRUCTION AND BUILDING MATERIALS, 2007, 21 (01) :19-28

[6] EFFECTS OF STEEL COUNTERFACE ROUGHNESS AND TEMPERATURE ON THE FRICTION AND WEAR OF PE(E)K COMPOSITES UNDER DRY SLIDING CONDITIONS [J].

FRIEDRICH, K ;

KARGERKOCSIS, J ;

LU, Z .

WEAR, 1991, 148 (02) :235-247

[7] Statistical analysis of fracture toughness of soda-lime glass determined by indentation [J].

Gong, JH ;

Chen, YF ;

Li, CY .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2001, 279 (2-3) :219-223

[8] Effects of humidity and counter-surface on tribochemical wear of soda-lime-silica glass [J].

He, Hongtu ;

Qian, Linmao ;

Pantano, Carlo G. ;

Kim, Seong H. .

WEAR, 2015, 342 :100-106

[9]

Hutchings I.M, 1992, TRIBOLOGY FRICTION W, P82

[10] Study of wear in self-lubricating composites for application in seals of electric motors [J].

Kawakame, Marcelo ;

Bressan, Jose Divo .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 179 (1-3) :74-80

← 1 2 3 →