Vapour Phase Soldering on Flexible Printed Circuit Boards

被引：0
作者：
Geczy, Attila [1 ]
Batorfi, Reka [1 ]
Szeles, Gergely [1 ]
Luhaly, Adam [1 ]
Ruszinko, Miklos [1 ]
Berenyi, Richard [1 ]
机构：
[1] Budapest Univ Technol & Econ, Dept Elect Technol, Budapest, Hungary
来源：
2014 IEEE 20TH INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME) | 2014年
关键词：
Flexible; Printed Circuit Board; Vapour Phase Soldering; polyimide;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The paper presents experimental results about Vapour Phase Soldering on flexible printed circuit boards, where the standard Surface Mounted Technology process was used for investigation. Test boards were prepared from FR4 type Printed Circuit Boards and single-sided flexible polyimide substrates. Lead-free SAC305 paste and different chip size surface mounted resistors were used for the test assembly. The soldering was performed with heat-level vapour phase method in a commercial oven. The tests were composed of different board setups: where the FR4 or the flexible boards were soldered without fixtures, and where the flexible boards were supported by fixtures. The results were evaluated with X-ray microscopy, cross-section optical inspection (IMC tests) and shear tests. The conclusion reveals similar quality factors in all cases, rendering vapour phase soldering a plausible alternative reflow method for soldering on flexible printed circuit boards
引用
收藏
页码：69 / 74
页数：6
相关论文
共 50 条
  • [21] Evaluation of Electronic Components Overheating on Printed Circuit Boards
    Hlinenko, Larysa
    Fast, Volodymyr
    15TH INTERNATIONAL CONFERENCE ON ADVANCED TRENDS IN RADIOELECTRONICS, TELECOMMUNICATIONS AND COMPUTER ENGINEERING (TCSET - 2020), 2020, : 89 - 92
  • [22] Recovery of copper from waste printed circuit boards
    Zhao, Y
    Wen, X
    Li, B
    Tao, D
    MINERALS & METALLURGICAL PROCESSING, 2004, 21 (02) : 99 - 102
  • [23] Footprint Classification of Electric Components on Printed Circuit Boards
    Ni, Yun-Jie
    Wang, Yan-Thih
    Ho, Tsung-Yi
    PROCEEDINGS OF THE 2020 ACM/IEEE 2ND WORKSHOP ON MACHINE LEARNING FOR CAD (MLCAD '20), 2020, : 169 - 174
  • [24] Simulation of Warpage During Fabrication of Printed Circuit Boards
    Kim, Sung-Won
    Lee, Sang-Hyuk
    Kim, Dae-Jin
    Kim, Sun Kyoung
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2011, 1 (06): : 884 - 892
  • [25] A tool for errors detection in printed circuit boards production
    de Luca Pennacchia, A.
    de la Fraga, L. G.
    Martinez Hernandez, U.
    JOURNAL OF APPLIED RESEARCH AND TECHNOLOGY, 2009, 7 (01) : 41 - 50
  • [26] Recovery of copper from waste printed circuit boards
    Y. Zhao
    X. Wen
    B. Li
    D. Tao
    Mining, Metallurgy & Exploration, 2004, 21 : 99 - 102
  • [27] A novel scheme in thermal modeling of printed circuit boards
    Liu, Wenjun
    Lee, Min-young
    Shabany, Younes
    Asheghi, Mehdi
    Advances in Electronic Packaging 2005, Pts A-C, 2005, : 385 - 391
  • [28] Linear Simplification of Dynamic Model for Printed Circuit Boards
    Wei, Hui
    Xu, Liangjun
    PROCEEDINGS OF THE 2017 2ND INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND ARTIFICIAL INTELLIGENCE (CAAI 2017), 2017, 134 : 245 - 250
  • [29] Noise Suppression Sheet Embedded in Printed Circuit Boards
    Chata'ni, Kenichi
    Igarashi, Toshiyuki
    Kondo, Koichi
    Ikeda, Masashi
    PROCEEDINGS OF THE 2024 IEEE JOINT INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, SIGNAL & POWER INTEGRITY: EMC JAPAN/ASIAPACIFIC INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, EMC JAPAN/APEMC OKINAWA 2024, 2024, : 216 - 219
  • [30] Examining the evolution of metals utilized in printed circuit boards
    Adie, Gilbert Umaye
    Sun, Lingyu
    Zeng, Xianlai
    Zheng, Lixia
    Osibanjo, Oladele
    Li, Jinhui
    ENVIRONMENTAL TECHNOLOGY, 2017, 38 (13-14) : 1696 - 1701
12345