Vapour Phase Soldering on Flexible Printed Circuit Boards

被引：0
|
作者：
Geczy, Attila [1 ]
Batorfi, Reka [1 ]
Szeles, Gergely [1 ]
Luhaly, Adam [1 ]
Ruszinko, Miklos [1 ]
Berenyi, Richard [1 ]
机构：
[1] Budapest Univ Technol & Econ, Dept Elect Technol, Budapest, Hungary
来源：
2014 IEEE 20TH INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME) | 2014年
关键词：
Flexible; Printed Circuit Board; Vapour Phase Soldering; polyimide;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The paper presents experimental results about Vapour Phase Soldering on flexible printed circuit boards, where the standard Surface Mounted Technology process was used for investigation. Test boards were prepared from FR4 type Printed Circuit Boards and single-sided flexible polyimide substrates. Lead-free SAC305 paste and different chip size surface mounted resistors were used for the test assembly. The soldering was performed with heat-level vapour phase method in a commercial oven. The tests were composed of different board setups: where the FR4 or the flexible boards were soldered without fixtures, and where the flexible boards were supported by fixtures. The results were evaluated with X-ray microscopy, cross-section optical inspection (IMC tests) and shear tests. The conclusion reveals similar quality factors in all cases, rendering vapour phase soldering a plausible alternative reflow method for soldering on flexible printed circuit boards
引用
收藏
页码：69 / 74
页数：6
相关论文
共 50 条
  • [1] Studying heat transfer on inclined printed circuit boards during vapour phase soldering
    Geczy, Attila
    Nagy, Daniel
    Illes, Balazs
    Fazekas, Laszlo
    Krammer, Oliver
    Busek, David
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2017, 29 (01) : 34 - 41
  • [2] Investigating heat transfer coefficient differences on printed circuit boards during vapour phase reflow soldering
    Geczy, Attila
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 109 : 167 - 174
  • [3] Investigating the heat transfer on the top side of inclined printed circuit boards during vapour phase soldering
    Iles, Balazs
    Geczy, Attila
    APPLIED THERMAL ENGINEERING, 2016, 103 : 1398 - 1407
  • [4] Soldering Tests with Biodegradable Printed Circuit Boards
    Geczy, A.
    Garami, T.
    Kovacs, B.
    Nagy, D.
    Gal, L.
    Ruszinko, M.
    Hajdu, I.
    2013 IEEE 19TH INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME), 2013, : 39 - 42
  • [5] Increasing Productivity inroductivity in Vapour Phase Soldering Using Vertical Stacking of Boards
    Havellant, Gergo
    Illes, Balazs
    Geczy, Attila
    2024 47TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY, ISSE 2024, 2024,
  • [6] Direct and Indirect Strain Measurement of Flexible Printed Circuit Boards - fPCBs
    Arruda, Luciano
    Coimbra, Cristiano
    Andolfatto, Joao Marco
    ENGINEERING SOLUTIONS FOR MANUFACTURING PROCESSES, PTS 1-3, 2013, 655-657 : 88 - 93
  • [7] Efficient Aminolysis of Polyimide for Chemical Recovery of Flexible Printed Circuit Boards
    Tian, Zishang
    Zhao, Qi
    Liu, Xingchen
    Wang, Yingxiong
    Zhao, Jie
    Wang, Yuqi
    Hou, Xianglin
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2023, 11 (31) : 11590 - 11600
  • [8] Authentication of Printed Circuit Boards
    Iyengar, Anirudh
    Vobilisetti, Nareen
    Ghosh, Swaroop
    ISTFA 2016: CONFERENCE PROCEEDINGS FROM THE 42ND INTERNATIONAL SYMPOSIUM FOR TESTING AND FAILURE ANALYSIS, 2016, : 605 - 608
  • [9] Towards flexible routing schemes for polymer optical interconnections on Printed Circuit Boards
    Hendrickx, N.
    Van Steenberge, G.
    Bosman, E.
    Van Erps, J.
    Thienpont, H.
    Van Daele, P.
    PHOTONICS PACKAGING, INTEGRATION, AND INTERCONNECTS VIII, 2008, 6899
  • [10] Laser cleaning of printed circuit boards
    Song, WD
    Hong, MH
    Lu, YF
    Chong, TC
    APPLIED SURFACE SCIENCE, 2003, 208 : 463 - 467
12345