Investigation on dilution effect on laminar burning velocity of syngas premixed flames

被引:44
|
作者
Li, Hong-Meng [1 ]
Li, Guo-Xiu [1 ]
Sun, Zuo-Yu [1 ]
Zhou, Zi-Hang [1 ]
Li, Yuan [1 ]
Yuan, Ye [1 ]
机构
[1] Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China
关键词
Dilution effect; Laminar burning velocity; Thermal effect; Chemical effect; Third-body effect; HYDROGEN-AIR MIXTURES; MARKSTEIN LENGTHS; ELEVATED PRESSURES; NORMAL TEMPERATURE; SPHERICAL FLAMES; CO2; DILUTION; SPEEDS; COMBUSTION; INSTABILITIES; STABILITY;
D O I
10.1016/j.energy.2016.06.015
中图分类号
O414.1 [热力学];
学科分类号
摘要
To provide more insight into the laminar burning velocity reduction of diluted syngas premixed flames, the laminar burning velocities of diluted syngas premixed (H-2/CO/N-2/air and H-2/CO/CO2/air) laminar spherical flames were systematically and thoroughly investigated experimentally via Schlieren technology. In the present investigation, the volume fraction of H-2 was varied from 30% to 70%, the volume fraction of CO was varied from 30% to 70%, the volume fraction of CO2 was varied from 0% to 60%, and the equivalence ratio was varied from 0.7 to 1.0. In the present investigation, the effects of equivalence ratio, hydrogen fraction, and dilution fraction on the laminar burning velocities were studied. Compared to N-2 dilution, the laminar burning velocity reduction with CO2 dilution was analysed through the thermal, transport, and, chemical effects. In addition, the contributions of third-body and direction effects were also studied. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:146 / 152
页数:7
相关论文
共 50 条
  • [1] Laminar burning velocity and ignition delay time for premixed isooctane-air flames with syngas addition
    Bhattacharya, Atmadeep
    Datta, Amitava
    Wensing, Michael
    COMBUSTION THEORY AND MODELLING, 2017, 21 (02) : 228 - 247
  • [2] The Effect of CO2 Dilution on the Laminar Burning Velocity of Premixed Methane/Air Flames
    Chan, Y. L.
    Zhu, M. M.
    Zhang, Z. Z.
    Liu, P. F.
    Zhang, D. K.
    CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE, 2015, 75 : 3048 - 3053
  • [3] Study on laminar burning velocity of syngas-air premixed flames in various mixing conditions
    Lee, Kee-Man
    Jeong, Byeonggyu
    Lee, Seungro
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (07) : 3005 - 3015
  • [4] Effects of Dilution on Laminar Burning Velocity of Premixed Methane/Air Flames
    Galmiche, B.
    Halter, F.
    Foucher, F.
    Dagaut, P.
    ENERGY & FUELS, 2011, 25 (03) : 948 - 954
  • [5] Development of laminar burning velocity measurement system in premixed flames with hydrogen-content syngas or strong oxidizer conditions in a slot burner
    Li, Yueh-Heng
    Liang, Jin-Wei
    Lin, Hung-Ju
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 35
  • [6] Measurement of the laminar burning velocities and markstein lengths of lean and stoichiometric syngas premixed flames under various hydrogen fractions
    Li, Hong-Meng
    Li, Guo-Xiu
    Sun, Zuo-Yu
    Zhai, Yue
    Zhou, Zi-Hang
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (30) : 17371 - 17380
  • [7] Investigation of dilution effect with N2/CO2 on laminar burning velocity of premixed methane/oxygen mixtures using freely expanding spherical flames
    Khan, A. R.
    Anbusaravanan, S.
    Kalathi, Lokesh
    Velamati, Ratnakishore
    Prathap, C.
    FUEL, 2017, 196 : 225 - 232
  • [8] Effect of dilution on laminar burning characteristics of H2/CO/CO2/air premixed flames with various hydrogen fractions
    Li, Hong-Meng
    Li, Guo-Xiu
    Sun, Zuo-Yu
    Zhou, Zi-Hang
    Li, Yuan
    Yuan, Ye
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2016, 74 : 160 - 168
  • [9] Effects of nitromethane addition on the laminar burning velocity and ignition delay of syngas/air flames
    Bhattacharya, Atmadeep
    Datta, Amitava
    COMBUSTION SCIENCE AND TECHNOLOGY, 2018, 190 (07) : 1283 - 1301
  • [10] Study on laminar burning velocity of syngas-air premixed flames in various mixing conditions
    Kee-Man Lee
    Byeonggyu Jeong
    Seungro Lee
    Journal of Mechanical Science and Technology, 2015, 29 : 3005 - 3015