Effects of stress ratio on crack growth rate and fatigue strength for high cycle and very-high-cycle fatigue of metallic materials

被引：39
作者：
Sun, Chengqi [1 ]
Lei, Zhengqiang [1 ]
Hong, Youshi [1 ]
机构：
[1] Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China
来源：
MECHANICS OF MATERIALS | 2014年 / 69卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Stress ratio; Crack growth rate; Fatigue strength; Very-high-cycle fatigue; Metallic materials; DRIVING-FORCE PARAMETER; LOAD RATIO; PROPAGATION BEHAVIOR; STEELS; LIFE; PREDICTION; MECHANISMS; THRESHOLD; FAILURE; CLOSURE;
D O I：
10.1016/j.mechmat.2013.10.007
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper studies the effects of stress ratio R on crack growth rate and fatigue strength for high cycle and very-high-cycle fatigue of metallic materials. First, the effect of R on fatigue crack growth rate is analyzed, and the result shows that the effect of R on crack growth rate at near-threshold region and on Paris region is well expressed by a unified relation. Then, a model is developed for describing the fatigue crack growth rate with the effect of R in near-threshold region and Paris region. The model is verified by experimental data of metallic materials in literature. Finally, a formula is derived for the effect of R on fatigue strength. The estimated results are in good agreement with the experimental data for high cycle and very-high-cycle fatigue regime in literature. The comparison of the present result with Goodman diagram is also discussed. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：227 / 236
页数：10
相关论文
共 50 条
  • [31] The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels
    Hong, Youshi
    Liu, Xiaolong
    Lei, Zhengqiang
    Sun, Chengqi
    INTERNATIONAL JOURNAL OF FATIGUE, 2016, 89 : 108 - 118
  • [32] FURTHER EXPLORATION ON CHARACTERISTIC REGION OF CRACK INITIATION FOR VERY-HIGH-CYCLE FATIGUE
    Hong Y.
    Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics, 2022, 54 (08): : 2101 - 2118
  • [33] Numerical simulation of fish-eye fatigue crack growth in very high cycle fatigue
    Nguyen, H. Q.
    Gallimard, L.
    Bathias, C.
    ENGINEERING FRACTURE MECHANICS, 2015, 135 : 81 - 93
  • [34] A continuous testing method for fatigue strength evaluation in high cycle and very high cycle regimes
    Wu, Han
    Wang, Saisai
    Xu, Wei
    Sun, Chengqi
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 188
  • [35] Dominant factors for very-high-cycle fatigue of high-strength steels and a new design method for components
    Matsunaga, H.
    Sun, C.
    Hong, Y.
    Murakami, Y.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2015, 38 (11) : 1274 - 1284
  • [36] Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue
    Lopes, J. Henrique
    da Costa, Pedro R.
    Freitas, Manuel
    Reis, Luis
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2025, 48 (03) : 979 - 1000
  • [37] Dependence of fatigue strength on inclusion size for high-strength steels in very high cycle fatigue regime
    Liu, Y. B.
    Yang, Z. G.
    Li, Y. D.
    Chen, S. M.
    Li, S. X.
    Hui, W. J.
    Weng, Y. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2): : 180 - 184
  • [38] Effect of Aqueous Environment on High Cycle and Very-High-Cycle Fatigue Behavior for a Structural Steel
    Hong Youshi
    Qian Gui'an
    FRACTURE AND STRENGTH OF SOLIDS VII, PTS 1 AND 2, 2011, 462-463 : 355 - +
  • [39] Fractography and crack initiation of very-high-cycle fatigue for a high carbon low alloy steel
    Zhou, Cheng'en
    Qian, Gui'an
    Hong, Youshi
    FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 1113 - +
  • [40] Nanograin layer formation at crack initiation region for very-high-cycle fatigue of a Ti-6Al-4V alloy
    Su, H.
    Liu, X.
    Sun, C.
    Hong, Y.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (06) : 979 - 993
12345