CaO-Al2O3 glass-ceramic as a joining material for SiC based components: A microstructural study of the effect of Si-ion irradiation

被引:47
作者
Casalegno, Valentina [1 ]
Kondo, Sosuke [2 ]
Hinoki, Tatsuya [2 ]
Salvo, Milena [1 ]
Czyrska-Filemonowicz, Aleksandra [3 ]
Moskalewicz, Tomasz [3 ]
Katoh, Yutai [4 ]
Ferraris, Monica [1 ]
机构
[1] Politecn Torino, Dept Appl Sci & Technol, Inst Mat Phys & Engn, Turin, Italy
[2] Kyoto Univ, Inst Adv Energy, Uji, Kyoto 6110011, Japan
[3] AGH Univ Sci & Technol, Krakow, Poland
[4] Oak Ridge Natl Lab, Oak Ridge, TN USA
关键词
Joining; Glass-ceramic; SiC; Irradiation; SIC/SIC COMPOSITES; MATRIX COMPOSITES; SILICON-CARBIDE; SHEAR-STRENGTH; JOINTS; TI;
D O I
10.1016/j.jnucmat.2018.01.033
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The aim of this work was to investigate and discuss the microstructure and interface reaction of a calcia-alumina based glass-ceramic (CA) with SiC. CA has been used for several years as a glass-ceramic for pressure-less joining of SiC based components. In the present work, the crystalline phases in the CA glass-ceramic and at the CA/SiC interface were investigated and the absence of any detectable amorphous phase was assessed. In order to provide a better understanding of the effect of irradiation on the joining material and on the joints, Si ion irradiation was performed both on bulk CA and CA joined SiC. CA glass-ceramic and CA joined SiC were both irradiated with 5.1 MeV Si2+ ions to 3.3 x 10(20) ions/m(2) at temperatures of 400 and 800 degrees C at DuET facility, Kyoto University. This corresponds to a damage level of 5 dpa for SiC averaged over the damage range. This paper presents the results of a microstructural analysis of the irradiated samples as well as an evaluation of the dimensional stability of the CA glass-ceramic and its irradiation temperature and/or damage dependence. (c) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:172 / 180
页数:9
相关论文
共 31 条
[1]  
Asthana R, 2013, WOODH PUBL SER WELD, P323, DOI 10.1533/9780857096500.2.323
[2]   Joining of ZrB2-based ultra-high-temperature ceramic composites using Pd-based braze alloys [J].
Asthana, R. ;
Singh, M. .
SCRIPTA MATERIALIA, 2009, 61 (03) :257-260
[3]   Flexural strength and shear strength of silicon carbide to silicon carbide joints fabricated by a molybdenum diffusion bonding technique [J].
Cockeram, BV .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (07) :1892-1899
[4]   DAMAGE TO MACOR GLASS-CERAMIC FROM HIGH-DOSE 14 MEV NEUTRONS [J].
COGHLAN, WA ;
CLINARD, FW .
JOURNAL OF NUCLEAR MATERIALS, 1991, 179 :391-394
[5]   Joining of SiC ceramic with ternary carbide Ti3SiC2 [J].
Dong, HY ;
Han, WB ;
Li, SJ .
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 :1255-1258
[6]   Effects of neutron irradiation on glass ceramics as pressure-less joining materials for SiC based components for nuclear applications [J].
Ferraris, M. ;
Casalegno, V. ;
Rizzo, S. ;
Salvo, M. ;
Van Staveren, T. O. ;
Matejicek, J. .
JOURNAL OF NUCLEAR MATERIALS, 2012, 429 (1-3) :166-172
[7]   Joining of SiC-based materials for nuclear energy applications [J].
Ferraris, M. ;
Salvo, M. ;
Casalegno, V. ;
Han, S. ;
Katoh, Y. ;
Jung, H. C. ;
Hinoki, T. ;
Kohyarna, A. .
JOURNAL OF NUCLEAR MATERIALS, 2011, 417 (1-3) :379-382
[8]   Joining of machined SiC/SiC composites for thermonuclear fusion reactors [J].
Ferraris, Monica ;
Salvo, Milena ;
Casalegno, Valentina ;
Ciampichetti, Andrea ;
Smeacetto, Federico ;
Zucchetti, Massimo .
JOURNAL OF NUCLEAR MATERIALS, 2008, 375 (03) :410-415
[9]   Torsional Shear Strength Tests for Glass-Ceramic Joined Silicon Carbide [J].
Ferraris, Monica ;
Ventrella, Andrea ;
Salvo, Milena ;
Katoh, Yutai ;
Gross, Dietmar .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2015, 12 (03) :693-699
[10]   Torsional Shear Strength of Silicon Carbide Components Pressurelessly Joined by a Glass-Ceramic [J].
Ferraris, Monica ;
Salvo, Milena ;
Rizzo, Stefano ;
Casalegno, Valentina ;
Han, Shaohua ;
Ventrella, Andrea ;
Hinoki, Tatsuya ;
Katoh, Yutai .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2012, 9 (04) :786-794