FEM STRESS ANALYSES OF THE CONTACT STRESS DISTRIBUTIONS AT THE BEARING SURFACES IN BOLTED JOINTS USING HEXAGON BOLTS WITH FLANGES

被引:0
|
作者
Morozumi, Yukio [1 ]
Okumura, Masahiko [1 ]
Sawa, Toshiyuki
Kuwaki, Kengo
机构
[1] Toyota Motor Co Ltd, Toyota, Aichi, Japan
来源
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE 2010), VOL 9 | 2012年
关键词
Hexagon Bolts with Flanges; Contact Stress Distribution; Bearing Surface; Permanent Set; Finite Element Method;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In designing bolted joints, it is important to understand the contact stress distribution and permanent set at the bearing surface in the case of high initial axial tension. They are investigated using elasto-plastic FEM for hexagon bolts with flange. It is found that the difference in the contact stress distribution is large between elastic FEM and elasto-plastic FEM. Effects of the flange thickness and the flange slope angle on the contact stress distribution and permanent set are examined, and it is shown that they are substantially influential. In the experiments, hollow cylindrical specimens are compressed by the bolts with flange and permanent sets are measured at the bearing surface. The permanent sets are compared with permanent sets obtained from the elasto-plastic FEM and they are in a fairly good agreement. In addition, the equivalent length for the hexagon bolt with flange is proposed.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 50 条
  • [41] FEM stress analysis and sealing performance improvement of box-shaped bolted flanged joints using silicone sealant under internal pressure and thermal conduction conditions
    Kawamura, H
    Sawa, T
    Yoneno, M
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2003, 17 (08) : 1109 - 1125
  • [43] Stress Analysis Mapping for Mechanically Fastened Composite Bolted Lap Joints Using Cohesive Zone Model
    Abdellah, Mohammed Y.
    Suker, Dhia K.
    Alharthi, Hamzah
    Ghazaly, Nouby M.
    Gomma, A. A.
    Backar, Ahmed H.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2024, 24 (04) : 1759 - 1773
  • [44] Contact Stress Distribution of Large Diameter Ball Bearing Using Hertzian Elliptical Contact Theory
    Pandiyarajan, R.
    Starvin, M. S.
    Ganesh, K. C.
    INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 264 - 269
  • [45] FEM STRESS ANALYSIS AND SEALING PERFORMANCE OF BOLTED FLANGED CONNECTIONS USING PTFE BLENDED GASKETS UNDER INTERNAL PRESSURE
    Sato, Koji
    Muramatsu, Akira
    Kobayashi, Takashi
    Sawa, Toshiyuki
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 2, 2015,
  • [46] Experimental and FEM-supported investigation of wet ceramic clay extrusion for the determination of stress distributions on the applied tools' surfaces
    Bouzakis, K. -D.
    Efstathiou, K.
    Paradisiadis, G.
    Tsouknidas, A.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2008, 28 (11) : 2117 - 2127
  • [47] Topology of modified surfaces of involute helical gears with line contact developed for improvement of bearing contact, reduction of transmission errors, and stress analysis
    Litvin, FL
    Gonzalez-Perez, I
    Fuentes, A
    Hayasaka, K
    Yukishima, K
    MATHEMATICAL AND COMPUTER MODELLING, 2005, 42 (9-10) : 1063 - 1078
  • [48] Development of a 2-dimensional elastic contact stress analysis procedure using a hybrid method of FEM and BEM
    Nagashima, Toshio
    Ezawa, Yoshitaka
    Okamoto, Noriaki
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1991, 57 (536): : 871 - 878
  • [49] A generalized model for predicting stress distributions in thick adhesive joints using a higher-order displacement approach
    Methfessel, T. S.
    Becker, W.
    COMPOSITE STRUCTURES, 2022, 291
  • [50] Accounting for residual stresses in FEM analyses of laminated structures using the Puck criterion for three-axial stress states
    Schuecker, C.
    Pahr, D. H.
    Pettermann, H. E.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (13) : 2054 - 2062