Compatibilizing effect of maleic anhydride functionalized SEBS triblock, elastomer through a reaction induced phase formation in the blends of polyamide6 and polycarbonate .2. Mechanical properties

被引:61
作者
Horiuchi, S [1 ]
Matchariyakul, N [1 ]
Yase, K [1 ]
Kitano, T [1 ]
Choi, HK [1 ]
Lee, YM [1 ]
机构
[1] NATL IND TECHNOL INST,KWACHUN,KYUNGI DO,SOUTH KOREA
关键词
compatibilization; polyamide6; polycarbonate;
D O I
10.1016/S0032-3861(96)00465-X
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The relationship between mechanical properties and phase morphology of blends of polyamide6 (PA6) and polycarbonate (PC) compatibilized with a maleic anhydride functionalized poly[styrene-b-(ethylene-co-butylene)-b-styrene] triblock copolymer (SEBS-gMA) were explored. The in situ chemical reaction between the maleic anhydride of SEES and the amine end group of PA6 during melt mixing induces the encapsulation of SEBS-gMA on the PC domains in PA6 rich blends. Through this phase formation, the adhesion on the domain boundary between PA6 and PC are improved and thus mechanical properties are improved. The use of the combination of SEBS-gMA and unfunctionalized SEES as compatibilizers has been found to provide remarkable improvement of mechanical properties in the PA6/PC blends. A transmission electron microscope (TEM) study has revealed that the encapsulation of SEBS around the PC domains becomes gradually incomplete by the use of both SEBS-gMA and unfunctionalized SEES in the PA6 rich blends and at the same time the dispersed SEES domains in the PA6 matrix enlarge with increasing the ratio of unfunctionalized SEES to SEBS-gMA. In addition, the SEES phase encapsulating the PC domains become thicker accompanying with the incompletion of the encapsulation. Although the encapsulation is incomplete, maximum impact strength and maximum strain at break in tensile test can be obtained when certain combinations of SEBS-gMA and SEES are used. The observation of the domain boundary TEM has revealed that the thicker SEES phase on the domain boundary contains the micro domain structure of SEES, where the polystyrene phase forms a cylinder in a hexagonal arrangement in the poly(ethylene-co-butylene) matrix. Through this micro domain structure, SEES is assumed to perform as a thermoplastic elastomer and toughen the domain boundary between PA6 and PC. Copyright (C) 1996 Elsevier Science Ltd.
引用
收藏
页码:59 / 78
页数:20
相关论文
共 27 条
  • [1] BAUER R, 1988, METHOD MICROBIOL, P113
  • [2] EFFECT OF COMPATIBILIZATION ON THE PROPERTIES OF POLYAMIDE-66 POLYPROPYLENE (75/25 WT/WT) BLENDS
    DUVALL, J
    SELLITTI, C
    TOPOLKARAEV, V
    HILTNER, A
    BAER, E
    MYERS, C
    [J]. POLYMER, 1994, 35 (18) : 3948 - 3957
  • [3] EFFECT OF COMPATIBILIZATION ON THE PROPERTIES OF POLYPROPYLENE POLYAMIDE-66 (75/25WT/WT) BLENDS
    DUVALL, J
    SELLITTI, C
    MYERS, C
    HILTNER, A
    BAER, E
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1994, 52 (02) : 195 - 206
  • [4] BLENDS OF POLYAMIDE 6 WITH BISPHENOL-A POLYCARBONATE .2. MORPHOLOGY-MECHANICAL PROPERTIES RELATIONSHIPS
    GATTIGLIA, E
    TURTURRO, A
    PEDEMONTE, E
    DONDERO, G
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1990, 41 (7-8) : 1411 - 1423
  • [5] BLENDS OF POLYAMIDE-6 AND BISPHENOL-A POLYCARBONATE - EFFECTS OF INTERCHANGE REACTIONS ON MORPHOLOGY AND MECHANICAL-PROPERTIES
    GATTIGLIA, E
    TURTURRO, A
    LAMANTIA, FP
    VALENZA, A
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1992, 46 (11) : 1887 - 1897
  • [6] BLENDS OF POLYAMIDE-6 WITH BISPHENOL-A POLYCARBONATE .1. THERMAL-PROPERTIES AND COMPATIBILITY ASPECTS
    GATTIGLIA, E
    TURTURRO, A
    PEDEMONTE, E
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1989, 38 (10) : 1807 - 1818
  • [7] Compatibilizing effect of a maleic anhydride functionalized SEBS triblock elastomer through a reaction induced phase formation in the blends of polyamide 6 and polycarbonate .1. Morphology and interfacial situation
    Horiuchi, S
    Matchariyakul, N
    Yase, K
    Kitano, T
    Cho, HK
    Lee, YM
    [J]. POLYMER, 1996, 37 (14) : 3065 - 3078
  • [8] EFFECT OF FILLERS AND VOIDS ON COMPRESSIVE YIELD OF EPOXY COMPOSITES
    ISHAI, O
    COHEN, LJ
    [J]. JOURNAL OF COMPOSITE MATERIALS, 1968, 2 (03) : 302 - +
  • [9] IN-SITU COMPATIBILIZATION OF PBT/ABS BLENDS THROUGH REACTIVE COPOLYMERS
    LEE, PC
    KUO, WF
    CHANG, FC
    [J]. POLYMER, 1994, 35 (26) : 5641 - 5650
  • [10] MECHANICAL-BEHAVIOR AND MORPHOLOGY OF TOUGHENED ALIPHATIC POLYAMIDES
    MAJUMDAR, B
    KESKKULA, H
    PAUL, DR
    [J]. POLYMER, 1994, 35 (07) : 1399 - 1408