Flow characteristics of the diffuser/nozzle micropump-A state space approach

被引：18

作者：

Chandika, S. ^{[1
]}

Asokan, R. ^{[2
]}

Vijayakumar, K. C. K. ^{[3
]}

机构：

[1] Kongu Engn Coll, Dept Mechatron Engn, Erode 638052, TN, India

[2] Kongu Engn Coll, Dept Informat & Technol, Erode 638052, TN, India

[3] Kavery Coll Engn, Mettur 636453, TN, India

来源：

FLOW MEASUREMENT AND INSTRUMENTATION | 2012年 / 28卷

关键词：

Diffuser/nozzle; Micropump; Displacement; Flow rate; MATLAB; VALVE-LESS PUMP; PERFORMANCE; SIMULATION; DELIVERY; DESIGN;

D O I：

10.1016/j.flowmeasinst.2012.06.003

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper presents a new approach to predict the internal state of piezo driven (consisting of diaphragm and piezoelectric disc) diffuser/nozzle micropump at any instant of time. The dynamic performance is evaluated considering the damping effect. Analysis results show that, the natural frequency of the micropump is found to deteriorate when the damping factor is considered. The model is developed to predict the actuator displacement, flow velocity characteristics, flow rate and backpressure for different input frequencies using MATLAB. The validity of the proposed model is evaluated by comparing the simulation results in MATLAB with the experimental results. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：28 / 34

页数：7

共 50 条

[41] Numerical Analysis of Nozzle Flow and Spray Characteristics from Different Nozzles Using Diesel and Biofuel Blends
Ishak, M. H. H.
Ismail, Farzad
Mat, Sharzali Che
Abdullah, M. Z.
Aziz, M. S. Abdul
Idroas, M. Y.
ENERGIES, 2019, 12 (02)
[42] Study on Flow Field Characteristics of Nozzle Water Jet in Hydraulic cutting
Liao Wen-Tao
Deng Xiao-Yu
2ND INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, ENERGY TECHNOLOGY AND ENVIRONMENTAL ENGINEERING (MSETEE 2017), 2017, 81
[43] Flow Characteristics of 3-D Turning Diffuser using Particle Image Velocimetry
Nordin, Normayati
Karim, Zainal Ambri Abdul
Othman, Safiah
Raghavan, Vijay R.
Batcha, Mohd Faizal Mohideen
Hariri, Azian
Basharie, Siti Mariam
7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16), 2017, 1831
[44] A Novel Hybrid Approach for Numerical Modeling of the Nucleating Flow in Laval Nozzle and Transonic Steam Turbine Blades
Rad, Edris Yousefi
Mahpeykar, Mohammad Reza
ENERGIES, 2017, 10 (09):
[45] Collaborative Design of the Wrap Angles Between Impeller and Space Diffuser of Diagonal-Flow Pump
Pei, Yingju
Liu, Qingyou
Wang, Guorong
Song, Wenwu
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (09) : 7835 - 7849
[46] Numerical Investigation of Negative Flow Characteristics in a Centrifugal Compressor With Vaned Diffuser and Internal Volute
Qiao, Bing
Ju, Yaping
Zhang, Chuhua
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2022, 144 (07):
[47] An approach to State Space Control Teaching
Pizarro-Cespedes, Victor
Fernandez-Fernandez, Mario
Munoz-Poblete, Carlos
2019 IEEE CHILEAN CONFERENCE ON ELECTRICAL, ELECTRONICS ENGINEERING, INFORMATION AND COMMUNICATION TECHNOLOGIES (CHILECON), 2019,
[48] Influence of Nozzle Layouts on the Heat-Flow Coupled Characteristics for Oil-Jet Lubricated Spur Gears
Yang, Duan
Liu, He
Zhong, Jianfeng
Zhu, Xiang
Dai, Yu
LUBRICANTS, 2023, 11 (01)
[49] Flow characteristics and phase transition of subcritical to supercritical kerosene injections in a convergent nozzle
Liu, Guigui
Lin, Yuzhen
Li, Jiaju
Xue, Xin
Hui, Xin
Sung, Chih-Jen
Yang, Yue
FUEL, 2023, 334
[50] Numerical investigation on spray and flow field characteristics of elliptical nozzle in supersonic crossflow
Yin, Bifeng
Zhang, Kang
Yu, Shenghao
Jia, Hekun
Chen, Chen
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (04) : 12774 - 12790

← 1 2 3 4 5 →