Grain refining performance of Al-B master alloys with different microstructures on Al-7Si alloy

被引：19
|
作者：
Wang, Tongmin [1 ]
Chen, Zongning [1 ]
Fu, Hongwang [1 ]
Li, Tingju [1 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China
来源：
METALS AND MATERIALS INTERNATIONAL | 2013年 / 19卷 / 02期
基金：
中国国家自然科学基金;
关键词：
alloys; cast; microstructure; solidification; scanning electron microscopy; TI-C; REFINEMENT; ALUMINUM; MECHANISM; NUCLEANT;
D O I：
10.1007/s12540-013-2012-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The improved halide salt route has been employed to produce Al-3B master alloys with different microstructures. The micro-structural features of AlB2 particles exhibited different impacts on the grain refining response of Al-7Si alloy, evolving with the holding time after inoculation. Large blocky AlB2 particles suffer from an intense fading effect while strip-like particles are not effective enough at the 0.005 wt% B addition level. Among the various Al-3B master alloys, sample 1 containing fine, blocky AlB2 particles was revealed to be the most efficient in refining Al-7Si alloy. With inoculation of only 0.005%B of such alloy, the final grain size of Al-7Si alloy can reach 238 mu m. Its grain refining efficiency was more or less retained for holding times up to 60 min.
引用
收藏
页码：367 / 370
页数：4
相关论文
共 50 条
  • [31] On the Role of Al-B Master Alloy and Heat Treatment on Synergistic Improvement in Electrical Conductivity and Hardness of Al-Mg-Si Alloys
    Bohane, Pawan
    Ali, Reyas
    Deshmukh, Pallavi
    Srivastav, Ajeet K.
    JOM, 2024, 76 (10) : 5866 - 5875
  • [32] A Comparative Study of Grain Refining of Al-(7-17%) Si Cast Alloys Using Al-10% Ti and Al-4% B Master Alloys
    Samuel, Agnes M.
    Samuel, Ehab
    Songmene, Victor
    Samuel, Fawzy H.
    MATERIALS, 2023, 16 (07)
  • [33] Microstructure and grain refining performance of a new Al-Ti-C-B master alloy
    Nie, Jinfeng
    Ma, Xiaoguang
    Ding, Haimin
    Liu, Xiangfa
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 486 (1-2) : 185 - 190
  • [34] Assessing Grain Refining Performance of Al–4B Master Alloys Produced Under Different Processing Conditions
    Auradi V.
    Bharath V.
    Nagaral M.
    Kori S.A.
    Journal of The Institution of Engineers (India): Series D, 2020, 101 (01) : 39 - 47
  • [35] Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys
    Muhammet Uluda?
    China Foundry, 2020, 17 (05) : 372 - 377
  • [36] Effect of a grain refiner cum modifier on mechanical properties of Al-7Si and Al-11Si alloys
    Jigajinni, S. M.
    Venkateswarlu, K.
    Kori, S. A.
    METALS AND MATERIALS INTERNATIONAL, 2013, 19 (02) : 171 - 181
  • [37] Effect of a grain refiner cum modifier on mechanical properties of Al-7Si and Al-11Si alloys
    S. M. Jigajinni
    K. Venkateswarlu
    S. A. Kori
    Metals and Materials International, 2013, 19 : 171 - 181
  • [38] New quaternary type of Al-Sr-Ti-B master alloy for grain refining and modifying of Al-Si
    Moldovan, P.
    Popescu, G.
    Popescu, C. A.
    Apostolescu, I.
    Buzaianu, A.
    MATERIALS AND TECHNOLOGIES, 2007, 23 : 295 - +
  • [39] Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys
    Muhammet Uludağ
    China Foundry, 2020, 17 : 372 - 377
  • [40] Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys
    Uludag, Muhammet
    CHINA FOUNDRY, 2020, 17 (05) : 372 - 377
12345